The exposure standard for wireless mobile phones
employs a unit of measurement known as the
Specific Absorption Rate, or SAR. The SAR limit
set by the FCC is 1.6 W/kg.*
* In the United States and Canada, the SAR limit
for mobile phones used by the public is 1.6 watts/
kg (W/kg) averaged over one gram of tissue. The
standard incorporates a substantial margin of
safety to give additional protection for the public
and to account for any variations in measurements.
Tests for SAR are conducted using standard
operating positions specified by the FCC with the
phone transmitting at its highest certified power
level in all tested frequency bands.
Caution
The user is cautioned that changes or
Although the SAR is determined at the highest
certified power level, the actual SAR level of the
phone while operating can be well below the
maximum value. This is because the phone is
designed to operate at multiple power levels so as
to use only the power required to reach
modifications not expressly approved by the party
responsible for compliance could void the warranty
and user’s authority to operate the equipment.
Optimize your phone’s performance
Use the guidelines on page 2 to learn how to
optimize the performance and life of your phone
and battery.
the network.
In general, the closer you are to a wireless base
station antenna, the lower the power output.
Before a phone model is available for sale to the
public, it must be tested and certified to the FCC
that it does not exceed the limit established by the
government-adopted requirement for safe
exposure. The tests are performed in positions and
locations (e.g., at the ear and worn on the body) as
required by the FCC for each model.
Air bags
If you have an air bag, DO NOT place installed or
portable phone equipment or other objects over the
air bag or in the air bag deployment area. If
equipment is not properly installed, you and your
passengers risk serious injury.
Medical devices
While there may be differences between the SAR
levels of various phones and at various positions,
they all meet the government requirement for
safe exposure.
Pacemakers—Warning to pacemaker wearers:
Wireless phones, when in the ‘on’ position, have
been shown to interfere with pacemakers. The
phone should be kept at least six (6) inches away
from the pacemaker to reduce risk.
The FCC has granted an Equipment Authorization
for this model phone with all reported SAR levels
evaluated as in compliance with the FCC RF
emission guidelines. SAR information on this
model phone is on file with the FCC and
can be found under the Display Grant section
http://www.fcc.gov/oet/fccid after searching
on the FCC ID.
The Health Industry Manufacturers Association
and the wireless technology research community
recommend that you follow these guidelines to
minimize the potential for interference.
•
Always keep the phone at least six inches
(15 centimeters) away from your pacemaker
when the phone is turned on.
FCC ID: OVFKWC-KX160A
FCC ID: OVFKWC-KX160B
•
•
•
Do not carry your phone near your heart.
Use the ear opposite the pacemaker.
Additional information on SAR can be found on the
Cellular Telecommunications and Internet
Association (CTIA) web-site at
If you have any reason to suspect that
interference is taking place, turn off your phone
immediately.
User Guide for the Kyocera Xcursion Phone
iii
Hearing aids—Some digital wireless phones may
interfere with hearing aids. In the event of such
interference, you may want to consult your service
provider or call the customer service line to discuss
alternatives.
•
•
•
vehicles using liquefied petroleum gas, such as
propane or butane
areas where the air contains chemicals or
particles such as grain, dust, or metal powders
any other area where you would normally be
advised to turn off your vehicle engine
Other medical devices—If you use any other personal
medical device, consult the manufacturer of the
device to determine if it is adequately shielded
from external RF energy. Your physician may be
able to help you obtain this information.
Use with care
Use only in normal position (to ear). Avoid
dropping, hitting, bending, or sitting on the phone.
In health care facilities—Turn your phone off in health
care facilities when instructed. Hospitals and
health care facilities may be using equipment that
is sensitive to external RF energy.
Keep phone dry
If the phone gets wet, turn the power off
immediately and contact your dealer. Water
damage may not be covered under warranty.
Potentially unsafe areas
Resetting the phone
Posted facilities—Turn your phone off in any facility
when posted notices require you to do so.
If the screen seems frozen and the keypad does
not respond to keypresses, reset the phone by
completing the following steps:
Aircraft—FCC regulations prohibit using your phone
on a plane that is in the air. Turn your phone off or
switch it to Airplane Mode before boarding aircraft.
1. Remove the battery door.
2. Remove and replace the battery.
If the problem persists, return the phone to the
dealer for service.
Vehicles—RF signals may affect improperly installed
or inadequately shielded electronic systems in
motor vehicles. Check with the manufacturer of the
device to determine if it is adequately shielded
from external RF energy. Your physician may be
able to help you obtain this information.
Accessories
Use only Kyocera-approved accessories with
Kyocera phones. Use of any unauthorized
accessories may be dangerous and will invalidate
the phone warranty if said accessories cause
damage or a defect to the phone.
Blasting areas—Turn off your phone where blasting
is in progress. Observe restrictions, and follow any
regulations or rules.
Potentially explosive atmospheres—Turn off your
phone when you are in any area with a potentially
explosive atmosphere. Obey all signs and
instructions. Sparks in such areas could cause an
explosion or fire, resulting in bodily injury or death.
To shop online for phone accessories, visit
To order by phone, call (800) 349-4188
(U.S.A. only) or (858) 882-1410.
Areas with a potentially explosive atmosphere are
often, but not always, clearly marked.
They include:
Radio Frequency (RF) energy
Your telephone is a radio transmitter and receiver.
When it is on, it receives and sends out RF energy.
Your service provider’s network controls the power
of the RF signal. This power level can range from
0.006 to 0.6 watts.
•
•
•
fueling areas such as gas stations
below deck on boats
transfer or storage facilities for fuel or
chemicals
iv
In August 1996, the U.S. Federal Communications
Commission (FCC) adopted RF exposure
guidelines with safety levels for hand-held wireless
phones. These guidelines are consistent with the
safety standards previously set by both U.S. and
international standards bodies in the
following reports:
•
•
ANSI C95.1 (American National Standards
Institute, 1992)
NCRP Report 86 (National Council on
Radiation Protection and Measurements,
1986)
•
ICNIRP (International Commission on Non-
Ionizing Radiation Protection, 1996)
Your phone complies with the standards set by
these reports and the FCC guidelines.
E911 mandates
Where service is available, this handset complies
with the Phase I and Phase II E911 Mandates
issued by the FCC.
Battery and charger specifications
Charger
Input
Output
TXACA10004 120 VAC, 60 Hz, 7 W
5.2VDC, 400 mA
4.2VDC, 600 mA
TXTVL10063 100 - 240 VAC,
50 / 60 Hz, 200 mA
Standard Battery: CV90-P2109-02, 3.7V, 900 mAh
Extended Battery: CV90-N5001-02, 3.7V, 1800 mAh
093 453 037
Kyocera Wireless Corp.
10300 Campus Point Drive, San Diego,
CA 92121 U.S.A.
Visit us at www.kyocera-wireless.com
To purchase accessories, visit
User Guide for the Kyocera Xcursion Phone
v
CONTENTS
Choosing ringers . . . . . . . . . . . . . . . . . . . . . . . 34
Setting sounds for your phone . . . . . . . . . . . . . 35
Adjusting volume . . . . . . . . . . . . . . . . . . . . . . . 35
Setting message alerts. . . . . . . . . . . . . . . . . . . . 36
Using shortcuts. . . . . . . . . . . . . . . . . . . . . . . . . 36
Personalizing the screen. . . . . . . . . . . . . . . . . . 37
Creating a secure environment . . . . . . . . . . . . . 39
Network settings . . . . . . . . . . . . . . . . . . . . . . . . 40
Data Settings. . . . . . . . . . . . . . . . . . . . . . . . . . . 41
Setting position location . . . . . . . . . . . . . . . . . . 42
1
Getting Started. . . . . . . . . . . . . . . . . . . . . . 1
Installing the battery . . . . . . . . . . . . . . . . . . . . . . 1
Getting to know your phone . . . . . . . . . . . . . . . . 3
2
Making and Answering Calls . . . . . . . . . . 8
Making a call . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Using the speakerphone . . . . . . . . . . . . . . . . . . . 9
Speed dialing . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Setting up voicemail . . . . . . . . . . . . . . . . . . . . . 11
Silencing an incoming call . . . . . . . . . . . . . . . . 12
Calling emergency services . . . . . . . . . . . . . . . . 12
Setting roaming alerts and ringers . . . . . . . . . . 13
Controlling network roaming . . . . . . . . . . . . . . 14
9
Using Media Gallery . . . . . . . . . . . . . . . . 43
Accessing files . . . . . . . . . . . . . . . . . . . . . . . . . 43
Creating free space . . . . . . . . . . . . . . . . . . . . . . 45
3
4
Storing Contacts . . . . . . . . . . . . . . . . . . . 15
Creating a new contact . . . . . . . . . . . . . . . . . . . 15
Editing or erasing a contact. . . . . . . . . . . . . . . . 16
Editing a phone number . . . . . . . . . . . . . . . . . . 16
Finding contact information . . . . . . . . . . . . . . . 16
10 Tools & Games. . . . . . . . . . . . . . . . . . . . . 46
Voice Memo . . . . . . . . . . . . . . . . . . . . . . . . . . . 46
Scheduler . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46
Alarm Clock . . . . . . . . . . . . . . . . . . . . . . . . . . . 47
Tip Calculator. . . . . . . . . . . . . . . . . . . . . . . . . . 47
Calculator. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47
Timer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48
Stopwatch. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48
World Clock . . . . . . . . . . . . . . . . . . . . . . . . . . . 48
Flashlight . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49
Games . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49
Brick Attack . . . . . . . . . . . . . . . . . . . . . . . . . . . 50
Race 21 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50
Using the Camera . . . . . . . . . . . . . . . . . . 18
Taking a picture . . . . . . . . . . . . . . . . . . . . . . . . 20
Camera key map . . . . . . . . . . . . . . . . . . . . . . . . 20
5
6
Entering Text, Numbers,
and Symbols . . . . . . . . . . . . . . . . . . . . . . 21
Sending and Receiving
Text Messages . . . . . . . . . . . . . . . . . . . . . 24
Sending text messages. . . . . . . . . . . . . . . . . . . . 24
Retrieving text messages . . . . . . . . . . . . . . . . . . 26
Customizing message settings . . . . . . . . . . . . . . 28
®
11 Using Bluetooth Wireless
Technology. . . . . . . . . . . . . . . . . . . . . . . . 53
7
Using Voice Recognition . . . . . . . . . . . . 30
Setting up voice dialing . . . . . . . . . . . . . . . . . . . 30
Calling using voice tags . . . . . . . . . . . . . . . . . . . 30
Calling using digit dialing . . . . . . . . . . . . . . . . . 31
Training voice recognition . . . . . . . . . . . . . . . . 32
12 Connecting to the Internet . . . . . . . . . . . 57
Using the Web Browser. . . . . . . . . . . . . . . . . . . 57
13 Getting Help . . . . . . . . . . . . . . . . . . . . . . . 59
14 Consumer Limited Warranty. . . . . . . . . . 61
Index . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 63
8
Customizing Your Phone . . . . . . . . . . . . 33
Silencing all sounds . . . . . . . . . . . . . . . . . . . . . 34
vi
Contents
1
GETTING STARTED
Installing the battery
Your phone comes with a removable lithium ion
(LiIon) battery.
Charging the battery
You must have at least a partial charge in the
battery to make or receive calls. Fully charge the
battery before using the phone.
To install the battery:
To charge the battery,
1. Hold the phone with the back facing you.
connect the AC adapter to
the jack on the bottom of
the phone, then plug the
adapter into a wall outlet.
2. Toward the bottom of
the phone there is a
recess to aid you in
opening the battery
door. Use your finger to
pull the battery door
away.
The battery icon in the
upper-right corner of the
screen tells you whether the phone is:
•
•
•
Charging (the icon is animated)
Partially charged
3. Place the battery in the
phone casing with the
metal contacts toward
the bottom of the phone.
Fully charged
Recharging the battery
4. Place the battery door
tab in the opening near
the top of the phone.
You can safely recharge the battery at any time,
even if it has a partial charge.
5. Press the battery door
until it clicks into place.
User Guide for the Kyocera Xcursion Phone
1
Caring for the battery
General safety guidelines
•
•
•
Do not take apart, puncture, or short-circuit
the battery.
If you have not used the battery for more than
a month, recharge it before using your phone.
Avoid exposing the battery to extreme
temperatures, direct sunlight, or high
humidity.
•
Never dispose of any battery in or near a
fire – it could explode.
Common causes of battery drain
•
•
•
Playing games or using the Web.
Keeping backlighting on.
Operating in analog ( ) mode. Your phone
switches between modes to find the best
signal. To set your phone to operate in a single
mode, select Menu → Settings →
Network → Digital/Analog.
•
Operating in digital mode when far away from
a base station or cell site.
•
•
Using data cables or accessories.
Operating when no service is available, or
service is available intermittently.
•
•
High earpiece and ringer volume settings.
Repeating sound, vibration or lighted alerts.
2
Getting Started
Getting to know your phone
Home screen.
1
2
3
4
5
6
7
8
Left softkey accesses menus and functions.
Send/Talk key starts or answers calls.
Speakerphone key activates the speakerphone.
Keypad for entering numbers, letters, or symbols.
* Shift key changes the text mode in text entry.
Jacks for AC adapter (included)*.
Navigation key positions cursor during text entry.
Scrolls through list.
OK key selects a menu item or option.
9
Right softkey to access Contacts and other menu options.
End/Power key turns the phone on and off. Ends a call.
10
11
12
Back key erases characters in text entry. Returns to previous
screen. Activates the flashlight when pressed and held.
# Space key enters a space during text entry. Activates Silent mode.
13
14
0 Next key cycles through word choices during text entry.
User Guide for the Kyocera Xcursion Phone
3
Antenna (does not extend).
Volume key to raise or lower speaker volume.
Camera key.
15
16
17
18
19
Camera lens.
Camera flash / flashlight flashes when taking a picture.
Also functions as the flashlight.
External screen displays time, caller ID, signal and
battery strength.
20
21
22
Charging indicator / message alert illuminates when the battery
is charging and blinks when a message is waiting.
Jack=for hands-free headset and data cable (sold separately)*.
*Warning: Inserting an accessory into the incorrect jack will damage the phone.
4
Getting Started
Using Menus
The contents of the main menu are as follows:
Recent Calls
All Calls
Incoming Calls
Outgoing Calls
Missed Calls
Erase Call Lists
Recent Calls Timer OutBox*
All Calls Timer Saved
Home Calls Timer Drafts
Roam Calls Timer Msg Settings
Contacts
View All
Add New
Messages
New Text Msg
Voicemail
InBox
Browser Alerts*
Sent
Media Gallery
Camera Pictures Brick Attack
Images
Sounds
Settings
Silent Mode
Sounds
Display
Convenience
Voice Features
Messaging
Security
Network
Accessories
Tools & Games
Bluetooth
On/Off
My Devices
Settings
Phone Info
Race 21TM
DoodlerTM
Voice Memo
World Clock
Scheduler
Alarm Clock
Tip Calculator
Calculator
Timer
Stopwatch
World Clock
Flashlight
Web Browser
Connects to
Phone number
Software Version
PRL Version
Factory Config
ESN
SID
Browser Info
Group Lists*
Erase Messages
Camera
Icon Key
Find Name
Launches the
Camera
BREW Apps
Launches BREW
Speed Dial List
Voice Dial List
Messaging Groups
Business List
Personal List
Internet
*Not available on all phones. Check with your service provider.
•
•
•
Press
Press
Press
to select Menu.
In this guide, an arrow → tells you to select an
option from a menu. For example, Menu →
Settings means select Menu, then select the
Settings option.
to select Contacts.
left, right, up, or down to view
menus and options*.
* To change the way the menus appear, select
Menu → Settings → Display → Main Menu View,
then select Graphic, List, or Wheel and
press . See “Choosing a menu view” on
page 37 for details.
•
•
•
Press
Press
Press
to select a menu item.
to back up a menu level.
to return to the home screen.
User Guide for the Kyocera Xcursion Phone
5
Performing basic functions
To...
From the home screen...
Turn the phone on
Turn the phone off
Make a call
Press
Press and hold
Enter the number, and press
and wait until the phone chimes.
until the phone beeps.
.
End a call
Press
Press
.
Answer a call
.
Access voicemail
Verify your phone number
Press and hold
and follow the system prompts.
Select Menu → Phone Info.
Silence the ringer on an
incoming call
Press , then
-or-
to answer.
Press
up or down, then
to answer.
Activate voice dialing
Launch the browser
Record a voice memo
Access recent calls list
Take a picture
Press
once and follow the prompts (see page 30).
Press and hold
Press and hold
left.
right.
Press
down.
Press camera key
.
6
Getting Started
High-speed (3G) data service is
available and active on your phone.
Check with your service provider for
availability.
(blinking) The phone is sending
high-speed data.
(blinking) The phone is receiving
high-speed data.
High-speed data service is available,
but the phone is dormant.
The phone is at the home screen.
Understanding screen icons
These icons may appear on your phone’s home
screen and the external LCD.
The phone is operating in IS2000 (1X)
digital mode.
The phone is operating in
IS95 digital mode.
The phone is operating in Analog
(FM) mode.
The phone is receiving a signal. You can
make and receive calls. Fewer bars
indicate a weaker signal.
To access Menu, press
The phone is at the home screen.
To access Contacts, press
.
.
A call is in progress.
The phone is set to light up instead
of ring.
The phone is set to vibrate or to vibrate
and then ring.
Position location is set to your service
provider and to emergency services.
Position location is set to emergency
services only.
Bluetooth wireless technology
is enabled (On).
The phone is not receiving a signal.
You cannot make or receive calls.
The phone is roaming outside of its
home service area.
You have a voice message.
The phone is in camera mode.
Camera flash mode is ready.
Camera timer mode is ready.
The battery is fully charged. The more
black bars, the greater the charge.
The alarm clock is set.
The phone is in privacy mode
or is accessing a secure Web site.
User Guide for the Kyocera Xcursion Phone
7
2
MAKING AND ANSWERING CALLS
Making a call
Make sure you are in an area where a signal can
Answering calls
When a call comes in and the flip is closed,
the phone rings and the phone number of the
caller appears on the external screen. If the
number is stored in your Contacts directory, the
contact name also appears.
be received. Look for
on the home screen.
Note: The more bars you see in this symbol,
the stronger the signal. If there are no bars,
move to where the signal strength is better.
1. Open the flip and enter the phone number.
When a call comes in and the flip is open, the
phone rings and an animated phone icon appears
on then screen. The phone number of the caller
also appears if it is not restricted. If the number is
stored in your Contacts directory, the contact
name appears.
2. Press
.
3. Press
to end the call or close the flip.
Redialing a number
To redial the last number called, received, or
To answer the call:
missed, press
a message prompting you to speak a name,
press two more times.
three times. If you see or hear
•
•
Open the flip.
Press
-or-
to answer the incoming call
Calling a saved number
If you have already saved a phone number, you
can use the Contacts list to find it quickly.
•
Press
to answer the incoming call and
turn on the speakerphone.
To silence or ignore the call
1. Press
to select Contacts.
When an incoming call is received, you can
choose to do one of the following:
2. Scroll down the list to find the contact you
want to call.
•
If the flip is closed, press
silence the ringer.
down to
3. Highlight the name and press
to dial
the number.
•
If the flip is open, to silence an incoming call,
press . Then press to answer the call.
8
Making and Answering Calls
•
If the flip is open, select Options and then
Ignore Call to immediately send the caller to
voicemail. Missed Call appears on your screen
until the caller leaves a message.
Turn on the speakerphone
You may turn on the speakerphone only when
the flip is open.
•
During an incoming call alert, press
to answer the call and turn on the
speakerphone simultaneously.
Note: In the absence of voicemail, this feature
drops the call.
•
Once the speakerphone is turned on,
“
Answering calls using the flip
Speaker is ON” displays on the screen.
Turn off the speakerphone
Press to turn off the speakerphone.
The message “ Speaker is OFF” appears.
You can set the phone to answer immediately
when you open the flip. This feature does not
apply to incoming data/fax calls.
•
1. Select Menu → Settings → Convenience →
Open to Answer.
Dealing with missed calls
2. Select Enabled to set the phone to answer
when you open the flip.
When you have missed a call, “Missed Call”
appears on your screen unless the caller
leaves a voicemail.
Select Disabled to have the phone continue
ringing when you open the flip.
•
To clear the screen, open the flip and press
Adjusting the volume during a call
to select OK.
•
To adjust the earpiece volume during a call,
press up or down.
•
To view details of the call, press
Calls. Highlight the missed call number and
press to select Details.
To return the call, highlight Missed Calls,
then press
to select
Using the speakerphone
•
Your Kyocera Xcursion phone has a built-in
speakerphone that you can use during a call
when the flip is open. This function works only
for the current call. Once the call is ended,
the speakerphone turns off and earpiece volume
returns to normal.
.
User Guide for the Kyocera Xcursion Phone
9
Setting missed call alerts
You can set an alert to beep every five minutes
after you have missed a call.
Viewing recent calls
1. Select Menu → Recent Calls.
2. Select a list: All Calls, Incoming Calls,
1. Select Menu → Settings → Sounds →
Outgoing Calls, or Missed Calls.
Alerts → Missed Call Alert.
3. Select a recent call item.
2. Press
to select an option:
4. Press
to select Options.
– Vibrate, Beep, Freeway, Game, Bloop,
Winner, Zilofon sets the phone to alert you
once when a new message is received.
–
–
–
Save adds the phone number to the
Contacts list.
Send Msg allows you to send a picture
message to the phone number.
– Vibrate & Remind, Beep & Remind, Fwy &
Remind, Game & Remind, Bloop & Remind,
Winner & Remind, Zilofon & Remind sets the
phone to notify you once when a new
Erase allows you to erase the call record
from the list.
message is received and then notify you
again every five minutes. To stop a reminder
Note: If the phone number has been classified as
“secret,” you must enter your four-digit lock code
to view or edit it. For information on the lock
code, see “Changing your lock code” on page 39.
To classify a phone number as secret, see
“Creating a new contact” on page 15.
alert, press
to select Ignore.
– Disabled—Turn off message alerts.
Viewing recent call details
Details on the last 60 calls you made, received,
or missed are stored in the Recent Calls list and
are identified by the following icons:
Calling recent calls
1. Press
2. Highlight the number you want to call.
3. Press
down.
Outgoing call
Incoming call
.
Missed call (flashing)
Erasing recent calls
1. Select Menu → Recent Calls →
Erase Call Lists.
2. Select an option: All Calls, Incoming Calls,
Outgoing Calls, or Missed Calls.
3. Press
to select Yes.
10
Making and Answering Calls
Using 1-Touch dialing
Speed dialing
To call a contact that has a speed dial location:
Speed dialing allows you to quickly dial a stored
phone number by entering a one- or two-digit
speed dialing location number and pressing
•
From the home screen, press and hold the
speed dialing number. If it is a two-digit
number, press the first digit briefly, then press
and hold the second digit. For example, if the
speed dialing location is 15, press
.
Note: Before you can use speed dialing, you must
save a phone number as a contact and assign a
speed dial location to it. Refer to “Creating a new
contact” on page 15 to create a new contact,
or “Editing or erasing a contact” on page 16
to add speed dial to an existing contact.
briefly, then press and hold
.
Setting up voicemail
Before your phone can receive voicemail
messages, you must set up a password and record
a personal greeting with your service provider.
When you have set up your voicemail, all
unanswered calls to your phone are automatically
transferred to voicemail, even if your phone is in
use or turned off.
Using speed dialing
To call a contact that has a speed dial location:
•
From the home screen, enter the one- or
two-digit speed dialing location and press
.
1-Touch dialing
1-Touch dialing is the fastest way to speed dial
a contact that has a speed dial location.
1. From the home screen, press and hold
2. Press at the message.
.
3. Follow the system prompts to create a
Note: You must (1) enable 1-Touch dialing on
your phone and (2) have a speed dial location
assigned to a contact. See “1-Touch dialing” on
this page.
password and record a greeting.
Note: If you are having trouble accessing your
voicemail, contact your service provider.
Enabling 1-Touch dialing
Checking voicemail messages
1. Select Menu → Settings → Convenience →
When a voice message is received, your screen
displays “New Messages” along with the
symbol at the top of your screen. The symbol
flashes if the message is urgent.
1-Touch Dialing → Enabled.
2. Press
.
User Guide for the Kyocera Xcursion Phone
11
You can call the code even if your phone is locked
or your account is restricted. When you call, your
phone enters Emergency mode. This enables the
emergency service exclusive access to your phone
to call you back, if necessary. To make or receive
regular calls after dialing the code, you must exit
this mode.
If you see “New Messages” with the
flip open
1. Press
to select Call, which initiates a call
to your voicemail number.
2. Follow the prompts to retrieve the message.
To clear the screen without checking messages:
•
Press
to select Ignore.
To exit Emergency mode
If you see only the
symbol
When you have completed the emergency call:
1. Press and hold
to initiate a call to your
1. Press
to select Exit.
voicemail number.
2. Press
again to confirm your choice.
2. Follow the prompts to retrieve the message.
Note: To determine who has access to your
location, see “Setting position location” on
page 42.
•
You can set the phone to beep or vibrate every
five minutes to remind you that you have
voicemail. See “Setting message alerts” on
page 36.
Tracking calls
You can track the number and duration of calls
made and received on your phone.
Silencing an incoming call
•
To silence an incoming call quickly, press
. Then press to answer the call.
1. Select Menu → Recent Calls.
This action silences the current call only. The next
call rings as normal.
2. Select a timer:
–
–
–
All Calls Timer—Tracks all calls you have
made and received. This timer cannot
be reset.
Calling emergency services
Note: Regardless of your 3-digit emergency code
(911, 111, 999, 000, etc.), your phone operates
as described below.
Home Calls Timer—Tracks all home
calls you have made since you last reset
this timer.
•
Dial your 3-digit emergency code
and press
Roam Calls Timer—Tracks all roaming
calls you have made since you last reset
this timer.
.
12
Making and Answering Calls
–
On any change alerts you with three
increasing tones if there is a change in
roaming service or three decreasing tones
if the phone loses service.
Timing your calls
You can set your phone to beep 10 seconds
before each minute passes when you are on a call.
•
Select Menu → Settings → Sounds →
Setting the roam ringer
Minute Alert → Enabled.
You can set a ringer to indicate when an incoming
call is subject to roaming charges.
Receiving data or faxes
1. Select Menu → Settings → Sounds →
Roam Ringer.
2. Highlight Enabled to hear the ringer.
Your phone may be able to receive certain data
or faxes, depending on the system sending the
information. For more information, see page 41.
3. Press
to set.
Setting roaming alerts
and ringers
Setting Call Guard to avoid roming
calls
You can set the phone to warn you before you
answer or place a call while roaming.
Setting an alert for roaming
You may use this setting if you want the phone
to alert you when you roam outside of your home
service area.
•
Select Menu → Settings → Convenience →
Call Guard → Call prompt.
–
The phone now emits a distinctive roam
ring to indicate when you are roaming
during calls.
1. Select Menu → Settings → Network →
Roam/Svc Alert.
2. Select an option and press
.
–
To accept or place a call while roaming,
–
When no svc alerts you with three tones
you must press
.
decreasing in pitch when service is lost
and three tones increasing in pitch when
service is acquired again.
Note: This functionality is disabled when the
phone is in emergency mode.
–
On roam change alerts you with two
decreasing tones when roaming service is
acquired and three increasing tones when
home area service is acquired again.
User Guide for the Kyocera Xcursion Phone
13
Turning roaming on or off
Controlling network roaming
This setting allows you to control the phone’s
roaming feature by specifying which signals the
phone accepts.
Specifying digital or analog mode
Depending on services available from your service
provider, you may set the phone to either digital
or analog mode. This is useful if you are in an
area that borders on digital service and the
automatic feature is causing the phone to keep
switching between modes.
1. Select Menu → Settings → Network →
Roam Option.
2. Select an option and press
.
–
Automatic (recommended setting)
1. Select Menu → Settings → Network →
accepts any system the phone
service provides.
Digital/Analog.
2. Select an option and press
.
–
No roaming prevents you from making
or receiving calls outside of your home
service area.
–
–
–
–
Automatic automatically switches the
phone between digital and analog.
Analog only sets the phone to work in
analog mode only.
Analog call forces a call into analog mode
for the duration of the next call.
Digital only sets the phone to work in
Note: If your phone has more than one setting for
Automatic, contact your service provider to
determine which one to use.
digital mode only.
14
Making and Answering Calls
3
STORING CONTACTS
Use your phone’s Contacts directory to store
information about a person or company. Your
phone can hold, on average, about 200
phone numbers.
8. Either save now or add more contact
information.
–
To save now, press
9. To enter additional phone numbers, email and
Web addresses, or notes, press down
to select Save.
Creating a new contact
repeatedly. For help switching between
numbers and letters for email or Web
addresses, see “Changing modes” on page 22.
1. From the home screen, enter the phone
number you want to save, including the
area code.
Adding a code or extension
Note: To save a contact without entering
a phone number, select Menu → Contacts →
Add New, select an option, and skip to step 3.
When you save the phone number of an
automated service, you may include a pause
where your phone would stop dialing; for
example, where you would wait to dial
an extension.
2. Select Save.
3. Select Save New Contact.
4. Enter a name for the contact. If you need
1. Enter the first portion of the phone number.
2. Select Options.
to learn how to enter letters, see page 21.
5. Select Options to add a symbol or smiley.
3. Select a type of pause:
6. Press
down once to move to the
–
–
Time Pause
number field.
Hard Pause
7. Select Options to add information to the
4. Enter the remaining numbers.
contact’s number.
5. Select Save and follow the prompts.
–
Time Pause stops dialing for two seconds,
then continues to dial.
–
Hard Pause stops dialing until you
select Release.
User Guide for the Kyocera Xcursion Phone
15
–
Secret—Make the number secret so that
it will not appear on the screen until the
lock code is entered. Secret numbers can
be called without a lock code. (For more
information, see “Restricting calls” on
page 40.)
Editing or erasing a contact
To make changes to a contact, take these steps.
1. Select Menu → Contacts.
2. Select View All or Find Name to find the
contact you want to edit.
3. Highlight the contact to edit and press
.
–
–
Primary Number—Make this number the
first one that shows up when you open the
contact.
4. Select Options.
5. Highlight an option and press
to select it:
Edit Contact or Erase Contact.
Add Voice Dial—Speak the name of the
contact person for this number so that you
can dial it using voice recognition (VR).
For more information, see page 30.
Editing a phone number
1. Select Menu → Contacts.
–
–
Erase Voice Dial—Erase the voice dial
name associated with the number.
2. Select View All or Find Name to find the
contact you want to edit.
Edit Voice Dial—Record a new voice
dial name.
3. Highlight the contact to edit and press
.
4. Press
number you want to edit.
5. Select Options.
6. Highlight an option for the phone number and
press
down to highlight the phone
7. Enter the new information and follow
the prompts.
8. Select Save, if necessary.
:
Finding contact information
–
–
–
–
–
Send Text Msg—Send a text message to
the phone number you selected.
To find a phone number or contact, you can
(1) check the frequent contacts list, (2) search
the Contacts directory, or (3) use Fast Find.
Add Speed Dial—Assign or remove the
location you use to speed dial the number.
Checking the Frequent List
View Number—See the phone number
you selected.
From the home screen, select Contacts. The last
15 of your most frequently called contacts appear
when the Frequent List is enabled. Scroll past the
double line for an alphabetical list of all contacts.
Erase Number—Erase the number from
the contact.
Edit Number—Change the phone number.
16
Storing Contacts
To enable the Frequent List setting
Setting Fast Find
•
Select Menu → Settings → Convenience →
Frequent List → Enabled.
With Fast Find, you press one or two keys to view
close matches of the number you are looking for.
•
From the home screen, select Menu →
Settings → Convenience → Fast Find →
Enabled.
Searching the Contacts directory
1. Select Contacts for a list of all contacts.
To quickly get down the list, enter the first
letter of the contact. The menu skips to that
letter of the alphabet.
Using Fast Find
1. From the home screen, press the keys
corresponding to the letters of the name you
want to find. A matching contact or speed dial
-or-
2. Select Menu → Contacts.
entry appears. Press
through matching entries.
down to scroll
3. Select a search method:
–
–
View All—List all saved contacts.
2. Highlight the name you want, then press
Find Name—Locate a specific name.
Enter part of the contact name, then
select Find.
to call the number.
–
Speed Dial List, Voice Dial List, Messaging
Groups, Business List, or Personal List—
Select a contact from a list.
4. Scroll down until you find the name you want,
then press
.
–
To call the contact, highlight the number
and press
To display contact information, press
.
–
.
User Guide for the Kyocera Xcursion Phone
17
4
USING THE CAMERA
–
–
Flash On, Off, or Automatic.
Tips before operating
your camera
Resolution options are 640 x 480, 320 x
240 (best for sending to email and
viewing), and 160 x 120.
•
You cannot activate the camera while on an
active call or while browsing files in the
media gallery.
–
–
Low Light Mode brightens the picture for
low light environments.
•
•
Once the camera is active, the home screen
acts as the viewfinder.
Self Timer options are Off (default) or 3,
5, or 10 second pauses. When set, the
camera beeps tones from 3 , 5 or 10
seconds down to the time the shutter
snaps the picture automatically. Self Timer
is not available when Multishot mode
is activated.
If you get a “Low memory” error on your
phone’s screen, check your resolution and
quality compression settings. See “Setting up
the camera” on this page.
•
•
If there is no activity within approximately
45 seconds after you turn your camera on,
then the camera quits and returns to the
previous launch point.
–
Multishot options are On or Off (default).
When set to On, the camera allows you to
take multiple pictures (up to six) while
the camera key is pressed and held. A tone
plays each time a picture is taken. A
second tone plays when the final picture
is taken.
Menu settings and options can only be
accessed when the camera is active.
Setting up the camera
for photos
1. With the flip open, select Menu → Camera.
–
–
Shutter Sound sets the sound used when
the shutter closes while taking a picture.
2. Select Options.
White Balance allows the camera to adjust
to whites. Useful feature for optimizing
picture taking in different light situations.
Options are Automatic, Fluorescent,
Incandescent, or Daylight.
3. Scroll left or right on the horizontal menu bar
using
.
4. Select Settings.
5. Scroll down to highlight an option and
press
:
18
Using the Camera
–
–
Color Tone allows the selection of Low
tone, Medium or High.
•
•
•
•
Brightness allows you to adjust the brightness
of the image in the home screen LCD.
Quality sets the picture compression.
The higher the compression, the better the
detail of the picture (higher pixel rate).
Options are Low, Medium, or High
(default). When set to High, the picture
file size is larger, using more memory.
Camera Pictures displays all pictures taken
and stored.
Last Picture shows the most recent
picture taken.
Frames allows you to add a frame or a stamp
to your picture. A frame or stamp cannot be
removed once it is used in a picture.
–
LED flashes a light to indicate a picture
has been taken. Options are On (default)
and Off.
Camera mode indicators
and icons
Restoring camera menu settings
The camera mode displays the following onscreen
indicators and icons:
The following settings revert to the default setting
each time you enter and exit the camera
application: Zoom, Brightness, Contrast, Camera,
MultiShot, Color tone, Frames, Self Timer, and
Picture Layout.
Icon
Description
Flash on
The following settings remain at the setting
you selected each time you enter and exit the
camera application: White Balance, Flash,
Resolution, Quality, Shutter Sound, and LED.
Camera mode
Number of snapshots
Top right hand
corner numbers. remaining
Zoom level
Menu options for camera mode
1. Select Menu → Camera.
Bottom left hand
numbers
Resolution setting
2. Select Options.
Multishot
3. Scroll up or down on the horizontal menu bar
Self Timer (when camera/
capture key is pressed, the
icon switches to a number
and begins counting down)
using
to scroll through the options:
•
Settings displays available camera settings you
may set up prior to taking a picture.
User Guide for the Kyocera Xcursion Phone
19
Taking a picture
Camera key map
Flip open
Key
Flip open
Camera
Menu Screen
Dismiss menu
options
1. Select Menu → Camera.
In
Take picture
2. Focus on the image using the phone’s display
as a viewfinder.
Select Capture to Select OK.
take picture
Select Options
Tip: Press
or zoom out.
up or down to zoom in
Cancel,
dismisses menu
Scroll menu
options right
Scrolls menu
options left
Select menu
option
3. Take the picture by pressing
.
Up
Zoom in
The image is immediately saved to
Media Gallery.
Down Zoom out
Takes picture
4. Press
more pictures.
5. Press when finished taking pictures.
to return to the viewfinder and take
20
Using the Camera
5
ENTERING TEXT, NUMBERS, AND SYMBOLS
You can enter letters, numbers, and symbols
in contacts, text messages, and your banner.
Entering numbers
•
•
To enter a number while in
press a number key once.
mode,
or
Understanding text entry
screens
The current text entry mode (and capitalization
setting, when applicable) are indicated by icons
To enter a number while in
mode, press and hold a number key until the
number appears on the screen.
Entering words letter by letter
characters
remaining
capitalization setting
text entry mode
Use normal alpha to enter letters.
1. Press a key once for the first letter, twice for
the second letter, and so on. If your phone is
set to Spanish, French, or Portuguese,
accented letters are available.
text entry
fields
2. Wait for the cursor to move right and enter
the next letter.
Text entry modes
There are five text entry modes:
Entering words quickly
When you press a series of keys using
checks its dictionary of common words
and guesses at the word you are trying to spell.
mode,
Case change
Numbers only
Normal alpha
1. For each letter of the word you want, press the
Rapid Entry
key once. For example, to enter the word
Add Symbol
“any” press:
2. If the word doesn’t match what you want,
press to look at other word matches.
3. When you see the word you want, press
→
→
.
Note: The mode you start in depends on the task
you are doing. For example, when entering a
phone number, you’re in number mode. When
entering a name for a contact, you’re in normal
text mode.
.
User Guide for the Kyocera Xcursion Phone
21
Entering symbols
While entering text, you can enter symbols by
pressing
until you see the symbol you want.
Using this method, you have access to the
following symbols:
.
& @ ,
1
‘
:
?
To access the full set of symbols:
1. Select Options.
2. Select
Add Symbol.
down to view the list of symbols.
3. Press
4. Press the number key corresponding to the
symbol you want.
Changing modes
Sometimes you need to change modes.
For example, to enter numbers in an email
address while in
mode, you must change to
mode, enter the numbers, and then change
back to
mode to complete the address.
To change text entry modes, you can either:
•
Press and hold
until the icon for the
mode you want appears.
-or-
•
Select Options, then the mode.
Capitalization settings
You can change capitalization at any time while
entering text. Simply press
to choose upper
or lower case while in Normal Alpha mode.
22
Entering Text, Numbers, and Symbols
Quick reference to text entry
This table gives general instructions for entering letters, numbers, and symbols.
To...
Do this...
Enter a letter
Use
mode and press a key until you see the letter you
want. For more information, see page 21.
Use mode and press a key once to enter its number.
For more options, see page 21.
Enter a number
Enter a symbol
Press
Press
Press
until you find the symbol you want. See page 22.
Enter a space
.
Erase a character
.
Erase all characters
Press and hold
.
Move the cursor right or left
Move the cursor up or down
Change text entry modes
Capitalize any letter
Press
Press
right or left.
up or down.
Press and hold
.
In
In
mode, press
mode, press
. Choose
. Choose
or
.
Lowercase any letter
Select soft options on the screen
.
Press the appropriate key,
.
User Guide for the Kyocera Xcursion Phone
23
6
SENDING AND RECEIVING TEXT MESSAGES
This chapter describes how to send, receive,
and erase text messages from your phone. For
information on voicemail messages, see page 11.
3. To add another recipient to this message,
choose a method:
–
Press
to select Options. Then select
Recent List, Contacts, or Group Lists.
- or -
Important: The features and menus described
in this chapter may vary depending on services
available in your area. In addition, usage charges
may apply to each message. For details, check
with your service provider.
–
Enter a space or comma after the first
number. Then enter another
recipient manually.
Note: You can send a message to up to 10
contacts at once. The messages are sent one at
a time, once to each addressee.
Sending text messages
You can only send text messages to phones that
are capable of receiving them, or to
email addresses.
4. When you are done entering addresses,
press
field.
down once to select the Subject:
Creating a text message
5. Enter a subject. To learn how to enter text,
1. Select Menu → Messages → New Text Msg.
see page 21.
2. Manually enter the recipient’s phone number
or email address in the Address: field.
(To learn how to enter text, see page 21.)
- or -
6. When you are done entering a subject,
press
down once to select the Text: field.
7. Enter the message.
8. To add smileys, select Options → Add Smiley.
Press
to select Options. Then select
Recent List, Contacts, or Group Lists. For
more about group lists, see page 28.
Setting sending options
When you are ready to send a message, you have
several options for how and when you want the
message to be received.
1. Once you have completed the message and
with the Text: field highlighted, press
to
select Options.
24
Sending and Receiving Text Messages
2. Scroll down to select:
Important: Your service provider charges you
for each message segment.
–
Add Address—Return to the “To” screen
to add another recipient without losing the
message text.
When you start a message, the maximum
character limit (“169” in the example) appears
below the text entry field. This number counts
down as you enter characters, until it reaches 0. If
you continue to enter text after this counter
reaches 0, a message segment may be appended.
When you reach the message size limit you are
prompted to edit the message or alerted that the
message is being appended.
–
–
Save Message—Save the message
without sending.
Save as Quick Text—Save the message
you have just entered as a prewritten
message, then return to the message entry
screen so you can send the message.
–
Settings/ Set Priority—Label the message
as “Urgent.”
Receiving incoming calls while
creating messages
3. Press
to select Send.
•
If you don’t want to answer the call, select
Options → Ignore Call. The phone returns
to the message screen.
If you cannot send messages
You may not be able to send or receive messages
if your phone’s memory is nearly full, or if digital
service is not available at the time. To free up
memory, erase old messages. See “Erasing
messages” on page 27.
•
To answer the call, press
. Your message
is saved to the Saved folder. To return to the
message, select Menu → Messages → Drafts
and press
to select the message.
Understanding appended messages
Viewing the OutBox
characters
remaining
You can check the status of messages you have
sent as long as they are saved to the OutBox.
To set the Outbox
text entry
field
The Outbox default is set to disabled to conserve
memory. If you want to save your sent messages:
•
Select Menu → Messages →
Msg Settings → Save to Sent.
If you go over the character limit for a single
message, the phone may automatically append an
empty segment to your message to make space.
User Guide for the Kyocera Xcursion Phone
25
–
–
Select Enabled to save all sent messages
to the Outbox.
The message was received and opened by
the recipient you specified. (This symbol
may not be available. Check with your
service provider.)
Select Prompt to alert you to choose
whether or not to save your message.
To view the OutBox
The message was sent to more than
one recipient.
1. Select Menu → Messages → OutBox.
2. Press
up or down through the list of
The message was never sent, or not sent
since last modified. You can cancel
delivery of the message.
messages. One of the following symbols
appears next to each message:
The message is pending and will be sent
when possible. You can cancel delivery of
the message.
Retrieving text messages
When a text message is received, your screen
displays “New Messages”, along with the
symbol at the top of your screen. The symbol
flashes if the message is urgent.
The scheduled message will be sent at the
scheduled time. You cannot cancel
delivery of the message.
If you see the “New Messages” note
The message cannot be sent
because service is not available. An alert
appears on your phone if the message
cannot be sent.
You can choose to:
•
•
View the message—Press
.
Ignore the message—Press
.
Note: If you receive a new message while you are
reading a message, the one you are reading is
replaced by the new one. You can find the older
message in the InBox:
The scheduled message was sent and will
be delivered as scheduled. You cannot
cancel delivery of the message.
The message was received by the
recipient you specified.
Select Menu → Messages → InBox.
26
Sending and Receiving Text Messages
–
Save Object(s), such as sound or pictures,
from the message. (This option is
available if the incoming message includes
a graphic or sound.)
If you see the
symbol
If the
symbol is flashing, the message
is urgent.
1. Select Menu → Messages → InBox.
–
–
Save Contact to save the sender’s phone
number or email address in your
Contacts list.
A list of all your received messages appears.
New, unread messages appear in bold.
indicates an “Urgent” message.
Save as AutoText to save the text from the
message as AutoText, which you can insert
into other messages. Graphics and sound
is not saved as part of AutoText.
2. Press
up or down to scroll through
the list of messages.
3. Press
to read a message.
3. Select Done.
Reading the message
Note: The
symbol indicates that a graphic did
The options available to you may vary. Check with
your service provider.
not come through. It may be too large or
incorrectly formatted.
Note: Sounds embedded in text messages do not
play if the phone is set to Silence All mode.
Setting message alerts
1. If the text message is long, press
down to
You can set your phone to alert you of incoming
text messages or pages. For more information,
see “Setting message alerts” on page 36.
view the entire message.
2. When you are finished, you can Reply to the
sender, Play the sound embedded in the
message, Erase the message, Save the
message to your Saved folder, or set additional
Options for the message:
Erasing messages
Your phone is designed to store 99 text messages
and pages. It is a good idea to erase old messages,
as messages take up memory in your phone.
–
–
–
View Sender information.
You have the option of erasing text messages and
pages as you send or read them, erasing them one
at a time from the list in the OutBox or InBox,
or erasing them all at once.
Forward the message.
Reply with Copy to reply to the message
with a copy of the original attached.
User Guide for the Kyocera Xcursion Phone
27
Erasing single messages
Erasing messages automatically
1. Select Menu → Messages.
Use this setting to have old messages
automatically erased from the InBox when
memory is low.
2. Press
you want to erase: InBox, OutBox, or Saved.
3. Press
down to the type of text message
1. Select Menu → Messages →
Msg Settings → Auto-Erase.
.
4. Highlight the message to erase and press
.
2. Highlight Old InBox Msgs and press
.
5. Select Options.
Older messages are erased as new messages
are received.
6. Select Erase to erase the message. A
notification appears: “Erase this message?”
•
To disable this setting select Menu →
Messages → Msg Settings → Auto-Erase →
Disabled.
7. Select Yes to erase the message.
Note: You can erase a scheduled message from
the OutBox, but you cannot cancel delivery of
the message.
Customizing message settings
To make messaging easier, you can customize
settings for sending and receiving messages.
Erasing all messages
1. Select Menu → Messages →
Erase Messages.
Creating group lists
2. Select a folder to erase all messages from:
InBox, OutBox, Sent, Saved Folder, or Drafts
Folder. To erase messages from all folders,
select All Messages.
You can create and save a list of multiple
recipients. Your Xcursion phone stores five group
lists with up to 10 recipients per list.
1. Select Menu → Messages → Group Lists →
3. A message appears: “Erase all messages?”
Create New.
Select Yes to erase messages or No to cancel.
2. Enter a title for the list. For help entering text,
see page 21.
3. Press
to select Next.
28
Sending and Receiving Text Messages
4. To enter the first phone number or email
address, select an option:
–
–
–
Recent List to select numbers from your
Recent List.
New Address to enter the phone number
or email address manually.
Contacts List to select numbers from your
phone book.
5. Highlight a contact and select Select.
6. Highlight the contact’s number and
select Select.
7. Select Options to select the next number.
8. Select Recent List or Contacts then the
contact to add.
9. When finished, select Done.
10. To send a message to your new group,
see “Sending text messages” on page 24.
User Guide for the Kyocera Xcursion Phone
29
7
USING VOICE RECOGNITION
Voice recognition allows you to make and
answer calls by speaking commands into the
phone’s microphone.
Editing a voice tag
1. Select Menu → Contacts → Voice Dial List.
2. Highlight the contact you want to edit, and press
Note: You cannot use voice recognition to end
to select it.
a call; you must press
when the flip is open.
3. Highlight the phone number, select Options.
4. Select Add Voice Dial, Erase Voice Dial,
Setting up voice dialing
To make or receive calls using voice dialing,
contacts must be saved with associated voice tags.
or Edit Voice Dial.
5. Follow the prompts.
Calling using voice tags
1. If you haven’t already done so, record a voice
Creating a voice tag for a contact
1. Select Menu → Contacts → View All.
2. Highlight a contact to add a voice tag to and
tag for the person you wish to call.
2. From the home screen, press
. The phone
press
to select.
responds: “Say a name.”
3. Press
down once to select the contact’s
3. Say the name of the person you want to call.
number.
4. If the name you said matches a contact in the
Voice Dial List, the phone responds: “Calling
(Name).” Remain silent to make the call,
or say No to cancel.
4. Press
to select Options.
5. Select Add Voice Dial.
6. Follow the voice prompts to record a name
for the contact.
Note: If the phone finds multiple voice tags that
sound like the name you said, you are asked to
verify which name you want to call. Say Yes
when you hear the correct name. Say No when
you hear an incorrect name.
Viewing entries with voice tags
•
Select Menu → Contacts → Voice Dial List.
A list of all contacts with assigned voice
tags appears.
5. When you are finished with the call, press
.
You cannot end the call with a voice command.
30
Using Voice Recognition
–
–
Say Cancel to exit voice recognizer and
return to the home screen.
Erasing all voice tags
To erase all voice name dial recordings in your phone:
Speak a digit to enter the next digit. Once
the phone repeats the digit, you can speak
the next digit or pause to hear the prompt.
1. Select Menu → Settings →
Voice Features → Erase Voice Dial.
2. Select Yes.
Using voice features with
accessories
You can use voice commands to make a phone call
or to answer the phone only if your phone is
connected to an accessory such as a hands-free car
kit or headset (both sold separately).
Calling using digit dialing
When using digit dialing, you speak digits to dial
a phone number.
Note: You cannot speak a string of digits. You must
speak one digit at a time and wait for the prompt.
1. From the home screen, press
. The phone
Note: The following features apply only to the
installed hands-free car kit unless noted.
responds: “Say a name or say Dial.”
2. Say Dial. The phone responds: “Speak a digit.”
To shop for these accessories, visit
www.kyocera-wireless.com/store or call
800 349-4188 (U.S.A. only) or 858 882-1410.
3. Speak the first digit of the phone number you
want to call. Once the phone repeats the digit,
you can speak the next digit.
Waking up the phone
If you pause, the phone prompts you with the
following five options. After the prompt, speak
an option.
If your phone is connected to a professionally
installed Kyocera hands-free car kit, you can use
a voice command to activate the phone to make a
phone call.
–
Say Clear to erase the digit last entered.
The phone responds: “Digit cleared.”
To clear the entire phone number, say
“Clear” again. When the phone prompts you
with “Clear entire phone number?”,
say “Yes” to clear or “No” to cancel.
To activate the Voice Wake-up setting:
•
Select Menu → Settings →
Voice Features → Voice Wake-Up →
With accessory.
To wake up the phone:
–
–
Say Call to dial the number.
1. Say “Wake Up” and listen for a tone.
2. Say “Wake Up” again until you hear two tones.
Say Verify to cause phone to repeat the set
of digits that you input.
User Guide for the Kyocera Xcursion Phone
31
If the phone does not recognize your “Wake up”
command, see “Training voice recognition” on
page 32.
To answer a call:
When you receive an incoming call, the phone
responds: “Incoming call, answer?” or “Incoming
roam call, answer?” If the caller is recognized as
a saved contact entry, then the phone says
“Incoming call from (Name), answer?”
Answering the phone
You can set the hands-free car kit to either (1) answer
automatically or (2) answer using a voice command.
•
Say Yes or press any key except
Ignoring an incoming call
To ignore an incoming call, do one of the following:
.
Answering automatically
You can set your phone to answer automatically.
•
Select Menu → Settings → Accessories →
•
•
Say No and press
to silence the alert.
Auto-Answer → After 5 seconds.
Remain silent. The voice alert repeats twice
and the phone rings once, then returns to the
home screen.
Answering using voice commands
If Auto-Answer is turned off, you can use a voice
command to answer an incoming call using the
Kyocera hands-free car kit.
Training voice recognition
•
Select Menu → Settings → Accessories →
Auto-Answer → Disabled.
If your phone is having trouble recognizing your
voice, you can train it with the commands Yes, No,
and Wake up.
To activate the Voice Answer setting:
1. Select Menu → Settings → Voice Features.
1. Select Menu → Settings →
Voice Features → Voice Answer.
2. Select Voice Training.
2. Highlight Enabled, then press
.
3. Read the message and press
to select OK
and continue. Cancel returns you to the
previous screen.
3. Select Menu → Settings → Silent Mode →
Normal Sounds, then press
.
4. Select Train All or the item you want to train.
5. Follow the prompts for each word until training
is complete.
32
Using Voice Recognition
8
CUSTOMIZING YOUR PHONE
The contents of the Settings menu are as follows.
Silent Mode
Vibrate Only
Display
My Banner
Voice Features
Add Voice Dial
Network
Data/Fax Calls
Vibe then Ring
Lights Only
Normal Sounds
My Ticker
Erase Voice Dial
Voice Training
Voice Wake-Up
Voice Answer
Expert Mode
Privacy Alert*
Set Phone Line*
Roam/Svc Alert
Roam Option*
Digital/Analog*
Location
Main Menu View
Color Themes
Wallpaper
Screen Saver
Backlighting
Auto-Hyphen
Language
Time/Date
Contrast
Brightness
Sounds
Ringer Volume
Ringer Type
Business Ringer
Personal Ringer
Roam Ringer
Flip Open
Flip Closed
Pwr On/Off Sound
Key Volume
Messaging
Alerts
Signature
Edit QuickText
Callback Number
Text Msg Receipt
Save to Sent
Accessories
Pwr Backlighting
Headset Ringing
Auto-Answer
Com Port Speed
TTY Device
Convenience
Open to Answer
Auto-Erase
Key Length
Fast Find
Default Text
Key Sound
Alerts
Smart Sound
Minute Alert
Earpiece Volume
Spkrphone Volume
Frequent List
Hold Call
1-Touch Dialing
Web Prompt
Call Guard
Voicemail Number
Security
Lock Phone
Limit Calls
New Lock Code
Erase Contacts
Emergency Numbers
*Not available on all phones. Check with your service provider.
User Guide for the Kyocera Xcursion Phone
33
Silencing all sounds
Choosing ringers
Your Kyocera Xcursion phone has multiple
ringers you can choose to use for incoming calls.
Your phone is set to make sounds when you
receive calls, press keys, navigate through menus,
and receive alerts (such as new messages).
1. Select Menu → Settings → Sounds →
You can silence all sounds and set the phone to
vibrate or light up when you receive calls
and alerts.
Ringer Type.
2. Scroll down the list to hear the different rings.
3. Press
to select a ringer from the list.
Setting the phone to vibrate
or light up
Note: Downloaded ringers are added to the end
of the standard list of ringers.
1. Select Menu → Settings → Silent Mode.
Assigning business and
personal ringers
2. Choose an option and press
:
–
Vibrate Only—Causes the phone to vibrate
for the duration of the incoming call or
other alert. appears.
You can assign ringers to contacts classified as
business or personal in your Contacts directory.
Note: To classify a contact as Business or
Personal, see page 15.
–
Vibe then Ring—Causes the phone to
vibrate for the first 10 seconds and then
ring for the remainder of the incoming
1. Select Menu → Settings → Sounds.
2. Ηighlight Business Ringer or Personal Ringer
call alert.
appears.
and press
.
–
–
Lights Only—Causes the phone to light up
for the duration of the incoming call or
3. Select a ringer and press
.
other alert.
appears.
Importing ringers
Normal Sounds—Causes the phone to
ring for the incoming call or alert (in
effect, returns phone to a non-silent
mode).
You can download additional ringers to your
phone using the Kyocera Phone Desktop software
and Ringster, if available (sold separately). To
purchase this software and other accessories, visit
3. Press
to return to the home screen.
Note: The phone rings when attached to an
external power source (such as a charger),
even if all sounds are silenced.
34
Customizing Your Phone
Adjusting the earpiece volume
Setting sounds for your phone
To adjust the earpiece volume manually during
You can set your phone to sound tones when you
open and close the flip, and when you turn the
phone on and off. Sounds will not occur during
an incoming call, if you are in a call, or if a
headset or car kit is attached to your phone.
a call, press the
key up or down.
To set the earpiece volume:
1. Select Menu → Settings → Sounds →
Earpiece Volume.
2. Press
or left to decrease the volume.
3. Press
right to increase the volume,
Set sound when flip opens
1. Select Menu → Settings → Sounds →
Flip Open.
to select Save.
Adjusting the ringer volume
2. Scroll through the list to hear the sounds.
1. Select Menu → Settings → Sounds →
3. Select a sound and press
to save.
Ringer Volume.
Set sound when flip closes
2. Press
right to increase the volume,
or left to decrease the volume.
1. Select Menu → Settings → Sounds →
Flip Closed.
3. Press
to select Save.
2. Scroll through the list to hear the sounds.
Adjusting speakerphone volume
3. Select a sound and press
to save.
1. Select Menu → Settings → Sounds →
Spkrphone Volume.
Set sound when phone powers
on or off
2. Press
right to increase the volume,
or left to decrease the volume.
1. Select Menu → Settings → Sounds →
Pwr On/Off Sound.
3. Press
to select Save.
Adjusting key tone volume
2. Select Enabled. To deselect this sound,
select Disabled.
You can change the volume of the tones the phone
makes when you press the keys.
Adjusting volume
You can adjust the earpiece, speakerphone,
and ringer volume as well as key tones.
1. Select Menu → Settings → Sounds →
Key Volume.
2. Press
right to increase the volume,
or left to decrease the volume.
3. Press
to select Save.
User Guide for the Kyocera Xcursion Phone
35
Setting key length
Using shortcuts
Your Kyocera Xcursion phone comes with four
shortcuts when in standby mode (flip open).
You can change duration of the tones the phone
makes when you press the keys.
1. Select Menu → Settings → Sounds →
Press
Press
Press
Press
up
down Access Recent Calls
left Launch Web browser
right Record voice memo
Access your custom menu
Key Length.
2. Choose Normal or Long.
3. Press
.
Setting message alerts
You can choose how you want be alerted of
incoming voicemail, pages, or text messages.
Creating a custom menu
1. Select Menu → Settings → Messaging →
You can create a custom menu that contains your
favorite features. After you set up your menu,
Alerts.
simply press and hold
up to access it.
2. Select the type of alert: Message Alert,
Page Alert, or Voicemail Alert.
1. Press and hold
up to launch
Custom Menu.
3. Press
to select an option:
2. Press
3. Scroll through the available options.
4. Press to select or deselect options. You
to select Edit.
–
Vibrate, Beep, Freeway, Game, Bloop,
Winner, Zilofon sets the phone to alert you
once when a new message is received.
–
Vibrate & Remind, Beep & Remind, Fwy &
Remind, Game & Remind, Bloop & Remind,
Winner & Remind, Zilofon & Remind sets
the phone to notify you once when a new
message is received and then notify you
again every five minutes. To stop a
may select more than one feature. Items
appear in alphabetical order in the menu.
5. Press
to select Save.
Updating your custom menu
1. Press and hold
up to launch
reminder alert, press
to select Ignore.
Custom Menu.
–
Disabled—Turn off message alerts.
2. Press
3. Press
4. Press
to select Edit.
to select or deselect options.
to select Save.
36
Customizing Your Phone
2. Press
to select Edit.
Creating a shortcut to frequent
contacts
3. Press
to clear the screen.
4. Enter your new text.
By default, your phone lists your entire contacts
list when you select Contacts. You can also set the
phone to show a list of your most
5. Press
to select Save.
Choosing a menu view
frequent contacts.
Two menu views are available:
1. Select Menu → Settings → Convenience →
Frequent List.
1. Select Menu → Settings → Display →
Main Menu View, then the option you want:
2. Select Enabled to include the list or
Disabled to remove it.
–
Graphic displays graphical icon view
of menu items.
Using the Frequent Contacts shortcut
–
–
List displays menu items in text format.
•
From the home screen, press
to select
Wheel displays a rotating graphic image
of the menu items.
Contacts. Your 15 most frequently called
contacts appear at the top of the list,
followed by your complete contact list.
2. Press
up or down to scroll menu views.
to return to the home screen.
3. Press
Choosing a different language
Your phone may display alternative languages.
The next time you select Menu, you see the
menu view you selected.
1. Select Menu → Settings → Display →
Adjusting the backlighting
Language.
Your screen lights up while you are in a call or
when you press a key on the keypad. However,
you can set the length of time that bright
backlighting remains on.
2. Select a language, and press
.
Personalizing the screen
Changing your banner
1. Select Menu → Settings → Display →
Backlighting → Duration.
The banner is the personal label for your phone.
It appears on the home screen above the time and
date. The banner can be up to 14 characters long.
2. Select an option from the list:
–
7 seconds, 15 seconds, or 30 seconds—
Turn backlighting on for 7, 15,
1. Select Menu → Settings → Display →
or 30 seconds after your last keypress.
My Banner.
User Guide for the Kyocera Xcursion Phone
37
–
7 sec. & in call, 15 sec. & in call, or 30 sec.
& in call—Turn backlighting on for the
duration of a call, and for 7, 15, or 30
seconds after your last keypress.
Changing the display contrast
1. Select Menu → Settings → Display →
Contrast.
2. Press
left or right to adjust the contrast.
Note: These settings drain the battery more
quickly and reduce talk and standby times.
3. Press
to select Save.
Setting numbers to auto-hyphenate
Using Power Save Mode
Auto-hyphenation, when enabled, automatically
inserts hyphens into your phone numbers to be
consistent with the U.S. dialing plan.
You can conserve battery life by activating Power
Save mode to dim the backlight set in the
procedure above. The backlighting appears for
the selected duration but is less bright than with
Power Save off.
For example, 1-222-333-4444.
•
Select Menu → Settings → Display →
Auto-Hyphen → Enabled.
•
Select Menu → Settings → Display →
Backlighting → Pwr Save Mode → On.
Selecting a screen saver
Screen savers appear on the home screen when
the flip is open and are activated 10 seconds after
the last keypress. Incoming calls and alerts
override screen savers.
Setting power backlighting
You can set backlighting to remain on when an
external power source, such as the AC adapter,
is used with the phone.
1. Select Menu → Settings → Display →
Note: Power backlighting may not be available
with the optional desktop charger or
other accessories.
Screen Saver.
2. Highlight a screen saver and press
.
The image displays.
1. Select Menu → Settings → Accessories →
3. Press
to assign the screen saver.
to return to the home screen and
Pwr Backlighting.
4. Press
2. Select Always On to keep backlighting on.
wait 10 seconds to view the screen saver
you chose.
Note: The battery charges more slowly when
power backlighting is on.
Note: Downloaded screen savers are added
to the end of the list.
38
Customizing Your Phone
Selecting wallpaper
Changing your lock code
Wallpaper appears on the home screen.
The lock code is typically 0000 or the last 4 digits
of your phone number.
1. Select Menu → Settings → Display →
Wallpaper.
1. Select Menu → Settings → Security.
2. Highlight a wallpaper design and press
.
2. Enter your four-digit lock code.
3. Press
to assign the wallpaper.
3. Select New Lock Code. A message appears:
“Change Code?”
4. Press
to return to the home screen.
4. Press
to select Yes and enter a new
Selecting a color theme
four-digit code.
You can select a color theme for the display
background of your phone.
5. Enter your new lock code again.
Locking your phone
1. Select Menu → Settings → Display →
Color Themes.
When your phone is locked, you can call only
emergency numbers or your service provider
number. You can still receive incoming calls.
2. Scroll through the options to view the
color themes.
1. Select Menu → Settings → Security.
2. Enter your four-digit lock code.
3. Select Lock Phone.
3. Highlight a color theme from the list
and press
.
4. Press
to return to the home screen.
4. Highlight an option:
Choosing a different time/date format
–
–
Never does not lock the phone.
1. Select Menu → Settings → Display →
On power up locks the phone each time
Time/Date.
you turn it on.
2. Highlight the option you want.
–
Now locks the phone immediately.
3. Press
to save the setting.
5. Press
.
Creating a secure environment
Unlocking the phone
This section describes all the features involved
in securing your phone and preventing access
to personal information. All security features are
shielded by a four-digit lock code.
1. From the home screen, press
to select Unlock.
2. Enter your four-digit lock code.
User Guide for the Kyocera Xcursion Phone
39
–
–
Limit Outgoing calls only. Incoming calls
can still be received and answered.
Designating emergency numbers
The emergency numbers feature allows you to
specify three personal phone numbers that can be
called when the phone is locked.
Limit All calls, both incoming and
outgoing.
1. Select Menu → Settings → Security.
2. Enter your four-digit lock code.
3. Select Emergency Numbers.
4. Select an Unassigned slot.
Erasing all contacts
You can erase all entries from your
Contacts directory.
1. Select Menu → Settings → Security.
2. Enter your four-digit lock code.
3. Select Erase Contacts.
5. Enter the phone number, including the area
code. Do not enter 1 before the area code.
6. Press
Notes:
to select Done.
4. Select Yes to erase all contacts. A message
appears: “Erase ALL Contacts?”
•
You can view these numbers only when they’re
being entered for the first time.
5. Press
to select Yes to erase all contacts.
•
•
You cannot edit these numbers.
Network settings
To make a call to an emergency number from
a locked phone, you must dial the number
(including area code) exactly as it was stored
in Emergency Numbers.
Switching between phone lines
Your phone can have two service accounts, or
phone lines, associated with it. Each phone line
has its own phone number.
Restricting calls
When you are using one line, you cannot receive
calls from the other. It would be as if the phone
were “off” for that number. Your voicemail,
however, will still take messages. All contacts and
settings are shared for both lines.
You can restrict the calls that can be made from
your phone to emergency numbers, your
contacts, and service provider numbers.
1. Select Menu → Settings → Security.
2. Enter your four-digit lock code.
3. Select Limit Calls.
Note: You must first establish a second phone
line with your service provider. Once established,
a second phone number becomes available in the
menu for selection:
4. Choose an option:
–
No Limit limits no calls.
40
Customizing Your Phone
1. Select Menu → Settings → Network →
1. Connect the phone to the laptop or PC.
Set Phone Line.
2. Set the Com speed.
2. Select one of the two lines and press
.
3. Select Menu → Settings → Network →
Data/Fax Calls.
Data Settings
4. Press
to select an option:
–
–
Voice only—Allow only voice calls.
Setting Com port speed
Fax, next call or Data, next call—Set the
phone to fax mode or data mode for the
next incoming call or the next 10 minutes.
The Com Speed sets the data rate at which your
phone connects to a laptop or PC.
1. Select Menu → Settings → Accessories →
–
Fax, until off or Data, until off—Forces the
phone into data mode until the phone is
turned off.
Com Port Speed.
2. Select the speed. The options are: 19.2 kbps,
115.2 kbps (default), 230.4 kbps and Other.
Note: You cannot receive voice calls while
the phone is in data/fax mode.
Note: There may be a higher charge for making
calls using high-speed data in areas where 1X
service is available. Check with your service
provider for details.
Connecting to a TTY/TDD device
You can connect the phone to a TTY device for the
hearing impaired. Note: Enable TTY only when
using the phone with a TTY device.
Setting the phone to receive data
or faxes
1. Connect the TTY device to the phone.
Your phone may be able to receive certain data
or faxes, depending on the system sending the
information. You cannot receive voice calls while
the phone is in data/fax mode. To receive data or
faxes, you must connect the phone to a laptop
or PC and switch the phone from voice mode
to data/fax mode.
2. Enter
from your keypad.
3. Press
to select the
TTY option.
4. Press
message.
to clear the
Note: To purchase a cable call (800) 349-4188
(U.S.A. only), (858) 882-1410, or visit
5. Press
down to highlight TTY On.
6. Press
.
User Guide for the Kyocera Xcursion Phone
41
Note: TTY/TDD service may not be available.
Check with your service provider for
more information.
Setting position location
This setting allows you to share your location
information with network services other than
emergency services (911, 111, 999, 000, etc.),
in markets where service has been implemented.
Note: This feature works only when your phone
is in digital mode. You do not have the option of
turning off the locator to emergency services.
1. Select Menu → Settings → Network →
Location.
2. At the message prompt, press
to selectOK
and continue.
3. Select 911 Only or Location On.
–
911 Only (default) shares your position
information only with emergency services
when you call your 3-digit emergency
code (911, 000, 111, etc.).
–
Location On shares your position
information with your service provider’s
network, in addition to emergency services.
42
Customizing Your Phone
9
USING MEDIA GALLERY
The media gallery stores and displays all the
image and sound files in the phone.
–
Modify allows you to change the following:
Rotate - select 90º right, 180º, 90º left,
Flip horizontal, and Flip Vertical.
Resize - select 90%, 75%, 50%,
and 30%.
Accessing files
1. Select Menu → Media Gallery.
Brightness - press
to adjust.
left or right
2. Select an option:
–
–
Camera Pictures displays thumbnails
of the photos you have taken in
chronological order.
Sharpness - press
to adjust.
Saturation - press
to adjust.
left or right
left or right
Images displays a list of categories that
contain preloaded, downloaded, saved,
or created files such as wallpaper,
screen savers, or caller IDs.
Hue - press
left or right to adjust.
Auto Adjust - automatically adjusts
all levels.
Color Tone - change the picture to
grayscale, negative, sepia, or emboss.
–
Sounds displays a list of categories that
contain saved or downloaded sounds such
as ringers and voice memos.
–
Zoom allows you to zoom in or out
on the picture.
–
–
Take Picture to snap another photo.
Browsing pictures
1. Select Menu → Media Gallery →
Lock to prevent accidentally erasing
the photo.
Camera Pictures.
–
–
Rename the picture.
2. Highlight a picture and press
Details of the file.
to select View.
3. Press
to select Erase.
- or -
Press
to select Options:
–
Assign picture as a Caller ID
or as wallpaper.
User Guide for the Kyocera Xcursion Phone
43
Browsing images
The images menu allows you to assign your files
to various applications.
Browsing sounds
The sounds menu allows you to view and listen
to all sound files stored on the phone.
1. Select Menu → Media Gallery → Images.
1. Select Menu → Media Gallery → Sounds.
2. Use
to highlight the menu item you want:
2. Use
to highlight the menu item you want:
–
Saved Images displays images you
–
Saved Sounds contains sounds saved
have saved.
on your phone.
–
–
Wallpapers displays wallpaper selections.
–
–
Ringers contains ringers saved on
your phone.
Screen Savers displays available
screensavers.
Voice Memos contains voice memos you
made to yourself.
–
–
Caller IDs displays pictures and images
that can be assigned to saved contacts.
3. Select OK to display the files in that menu.
Doodles displays files created
4. Select Options. Choose from the following
with Doodler.
options:
3. Select OK to display the files in that menu.
–
–
–
–
–
Erase the sounds.
4. Highlight an image and select Options.
Note: Options vary according to menu
Assign a sound as a ringer.
Rename a ringer.
selection. Choose from the following options:
Details gives you the file size of the sound.
Erase All erases all sounds stored.
–
–
–
–
Send launches the messaging application.
Erase the image.
5. Select Close when done.
Set As Default sets as default setting.
Assign an image as a caller ID, wallpaper
or screen saver.
–
–
–
Rename an image.
Details gives you the file size of the image.
Erase All erases all images stored
(images must not be locked).
5. Select
or
when done.
44
Using Media Gallery
Creating free space
If your phone does not have enough memory to
store a file, a dialog displays and asks you if you
want to create space.
•
Select Yes to display the file browser
(categories) with the memory needed
and available memory.
•
Select No to return to the previous screen
and no files are saved or downloaded.
The actions are limited to the following:
–
Erase the selected file (you cannot erase
locked files).
–
Done re-attempts the download or save.
User Guide for the Kyocera Xcursion Phone
45
10 TOOLS & GAMES
Naming a saved voice memo
Voice Memo
The Voice Memo tool allows you to record and
play back audio memos.
1. Select Menu → Tools & Games →
Voice Memo → Recorded Memos.
2. Highlight the memo and select Options.
3. Select Rename. Enter a name for the memo.
4. Select Save.
Recording a voice memo
1. Select Menu → Tools & Games →
Voice Memo → Record New.
-or-
5. Press
to return to the home screen.
Press and hold
right.
Erasing a saved voice memo
2. Say your memo and press to
select Stop.
1. Select Menu → Tools & Games →
3. Select Save to save your memo.
Voice Memo → Recorded Memos.
Note: If an incoming call is received while you’re
recording a memo, the memo is saved and the
incoming call screen displays.
2. Highlight the memo and select Options.
3. Select Erase. The prompt “Erase file?”
appears.
4. Select Yes or No.
Playing or reviewing a memo
1. Select Menu → Tools & Games →
Voice Memo → Recorded Memos.
Scheduler
The Scheduler allows you to schedule events
and set reminder alerts.
2. Highlight the memo to review.
3. Press
to select Play.
Creating an event
1. Select Menu → Tools & Games → Scheduler.
2. Press
and press
down to select Add Event
.
3. Enter a name for the event. For help entering
text, see page 21.
4. Select Next.
46
Tools & Games
5. Enter the time, length, and alarm for event.
3. Press
to select Done and save the setting.
–
Press
hour, minutes, and timing of alarm.
Press left or right to move
between fields.
up or down to select date,
4. When the alarm rings, select Off to turn off the
alarm or Snooze to silence the alarm for
10 minutes.
–
6. Select Next, enter a note if required.
Tip Calculator
The Tip Calculator helps you calculate how much
tip to include on a bill.
7. Select Done.
Viewing, editing, or erasing an event
1. Select Menu → Tools & Games →
1. Select Menu → Tools & Games → Scheduler.
Tip Calculator.
2. Select View Day or View Month to find the
2. Enter the amount of your bill.
event you want to view, edit, or erase.
3. Select Next.
3. Press
highlight an event and press
4. Select Edit or Options. Follow the prompts.
up, down, left, or right to
4. Select the amount you want to include as a tip
(10%, 15%, 18%, 20%, Other) and press
. Your total bill appears, including tip.
to select it.
5. Press
to return to the home screen or
to return to scheduler options.
5. To split the bill, press
6. Press to clear the default of 2 guests.
7. Enter the number of guests and press
to select Split.
to
Alarm Clock
Use the Alarm Clock to set an alert for a specific
time. The alert occurs only if the phone is on.
select Next. The amount each guest pays is
calculated.
8. Select Done.
1. Select Menu → Tools & Games →
Alarm Clock
Calculator
Use the calculator for basic mathematical
equations.
2. Select Set.
–
–
–
Press
and minutes.
up or down to select an hour
1. Select Menu → Tools & Games → Calculator.
Press
left or right to switch between
2. Use the keypad to enter numbers.
hours, minutes, and a.m./p.m.
3. Use
to select mathematical operations.
Use the phone keypad to enter numbers.
User Guide for the Kyocera Xcursion Phone
47
Navigation:
5. Press
to silence the alarm.
Left x (multiply) Up
+ (add)
Stopwatch
1. Select Menu → Tools & Games →
Right ÷ (divide) Down - (subtract)
4. Press to calculate the result.
Stopwatch.
Example: Enter 5, press
enter 2, then press
left to select X,
to obtain the result of 10.
2. Select Start to begin counting.
3. Select Stop to stop counting.
4. Select Reset to clear the counter.
5. Press
to return to the home screen.
to clear the screen.
6. Press
5. Press
to return to the home screen.
World Clock
World Clock may not be available on your phone.
Check with your service provider for availability.
Options
Adds displayed digit to the value stored
in memory.
M+
The World Clock lets you check times in cities
around the world in relation to local time.
Displays currently stored value on
screen.
MR
MC
1. Select Menu → Tools & Games →
Clears value currently stored in memory.
World Clock.
The World Clock menu is displayed. Your
local time and date is on the first line,
followed by your selected world city and that
city’s time and date. When you first access
World Clock, you are prompted to select
a city.
Timer
This timer counts down for a specified amount of
time. It beeps when that amount of time has elapsed.
1. Select Menu → Tools & Games → Timer.
2. Select Set.
3. Press
minutes, and seconds. To move the cursor,
press left or right.
up or down to set the hours,
2. Press
to select Cities.
The Cities menu is displayed, showing 85
world cities in alphabetical order.
4. Select Start and begin the countdown.
Select Stop to pause the countdown.
Select Reset to clear the timer.
3. Press
up or down to scroll through the
cities list. You can also use the number keys
(2-9) to alphabetically tab through the list.
48
Tools & Games
4. Press
to select a city, like Athens.
c. Countries beginning with A are displayed,
like Afghanistan, Algeria, and Australia.
The World Clock menu is displayed again,
with Athens’ time and date.
Use
to move through the list, then press
to select a country.
From the World Clock menu, you can also select
Search to search by city or country.
Flashlight
The flashlight is located on the top-right corner
of your phone.
1. Select Search from the World Clock menu.
The Search By menu is displayed.
2. Select your type of search.
You can turn on the flashlight in two ways:
–
–
Press
Press
search by City.
•
From the home screen, press and
down, then press
to
hold
. The flashlight remains on until you
search by Country.
release the key.
3. If you search by City, the Find City screen
-or-
is displayed.
•
Select Menu → Tools & Games →
Flashlight → Turn On.
a. Use your number keys (2-9) to enter the
letter(s) by which you want to search. For
example, press 2 once to enter the letter
A.
The flashlight remains on for 15 minutes.
Note: To turn it off, select Menu → Tools →
Flashlight → Turn Off.
b. Press Search.
c. Cities beginning with A are displayed, like
Games
Anchorage, Athens, and Atlanta.
The games in this section may not be available
on your phone. Check with your service provider
for availability.
d. Use
then press
to move through the list,
to select a city.
4. If you search by Country, the Find Country
If you receive an incoming call alert while you are
playing Brick Attack™ or Race 21™, the game is
paused and exited. You can return to play once
the call alert ends. Games do not remain paused if
the phone is turned off or loses power.
screen is displayed.
a. Use your number keys (2-9) to enter the
letter(s) by which you want to search. For
example, press 2 once to enter the letter A.
b. Press Search.
User Guide for the Kyocera Xcursion Phone
49
3. Select New Game. The first card to be placed
is shown at the top left of the screen. Press a
key to add a card to the row as follows:
Brick Attack
The goal of this game is to eliminate bricks
arranged in levels. You send a moving ball
upward using a paddle at the bottom of
the screen.
Add cards to the first row
Add cards to the second row
Add cards to the third row
Add cards to the fourth row
1. Select Menu → Tools & Games →
Brick Attack.
2. Press
to select Yes at the prompt, “Turn
off backlight to conserve battery?”
Shortcut: Press
left or right to choose
3. Press
to select New.
arrows at the bottom of the screen. Then press
to add cards to corresponding rows.
Note: Each time you place a card, a new card
appears for placement.
–
To pause the game, press
to Resume.
, then press
–
–
To move the paddle, press
left or right.
4. Continue placing cards until you are satisfied
To exit the game, highlight Exit
with your selections.
and press
.
–
–
–
You can pause or end the game at any time
by pressing
.
Race 21
You lose points each time you exceed 21
in a column.
This game is a timed variation of Black Jack. Each
game comprises three 90-second rounds. To
score points, add cards in each of the four
columns, trying to reach but not exceed 21 in
each column within during the course of
the game.
Select Skip to skip one card per round.
5. Press
to select
to get your score
and advance to the next round.
6. Select an option and press
to select it.
1. Select Menu → Tools & Games → Race 21.
–
New Game—Initiates game play. To pause
the game, press . From here you can
2. Press
at the splash screen.
choose Resume, New or Quit.
–
Resume Game—Returns you to the game
you were last playing.
50
Tools & Games
To erase part of drawing:
–
–
Scoreboard—Provides you with the top
five scores.
1. Select Options → Tools.
Music—Choose when you hear music
with this game. Select from Music Always,
Sound Effects, Instructions, Credits,
During Title, or No Music.
2. Select
, then Done.
3. Press a number key to move the eraser.
To Navigate: Use the following keys to doodle.
To:
Use:
7. Press
to end all games.
Select Options
Doodler
You can create and save graphics on your phone.
Clear screen
1. Select Menu → Tools & Games → Doodler.
Shortcut to Tools
2. Press
at the splash screen.
Draw, erase, or move cursor/
shape UP
Draw, erase, or move cursor/
shape DOWN
Draw, erase, or move cursor/
shape LEFT
Draw, erase, or move cursor/
shape RIGHT
3. Select New Doodle to open the drawing screen
The cursor is located in the middle of the
screen.
up
down
left
4. Select Options to choose the Colors, Tools,
Lines, or Shape you want to use.
5. Use keys 1–9 or
to
move the cursor around the
screen as indicated.
right
Return cursor to center
6. When finished, select
Options → Save. The
image is saved to
Previous screen
My Pictures.
To move cursor away from drawing:
1. Select Options → Tools.
2. Select
, then Done.
3. Press a number key to move the cursor.
User Guide for the Kyocera Xcursion Phone
51
Saving a doodle
It’s a good idea to save the doodle while you are
working on it. If you receive a call while creating
an unsaved doodle, it gets lost.
•
Select Options → Save and press
The image is saved in Menu →
.
Media Gallery → Images → Doodles.
Resuming a doodle
To return to another saved doodle:
•
Select Menu → Tools & Games →
Doodler → Resume Doodle.
Note: You can also go to Menu →
Media Gallery → Images → Doodles.
52
Tools & Games
®
11 USING BLUETOOTH WIRELESS TECHNOLOGY
®
Note: The Bluetooth feature may not be
Setting up Bluetooth wireless
technology on your
Kyocera phone
When you turn Bluetooth On the first time,
you are prompted to do a device search.
Follow the same procedure as for Find New,
described below.
available on your Kyocera Xcursion phone.
Check with your service provider.
Note: You must use a Bluetooth wireless
technology device (compatible with Class 2
Bluetooth wireless technology, version 1.2)
in order to use this phone wirelessly. Bluetooth
wireless technology accessories have the
symbol.
1. Select Menu → Bluetooth → ON/OFF.
2. Select one of the following:
®
The Bluetooth wireless technology on your
–
On Invisible hides your phone for all
devices except those listed in My Devices
(recommended setting).
Xcursion phone enables wireless connectivity with
accessories such as portable or installed hands-
free car kits, headsets, handsets, computers,
PC cards and adapters, PDAs, and speakers.
–
On Visible allows other devices to find
your phone.
Pairing
Note: Setting Bluetooth to Off prohibits your
phone from being used with any Bluetooth
wireless technology device. To prolong battery
life, it is recommended to set Bluetooth to Off
when you are not using it.
You must first “pair” your phone with the
Bluetooth wireless technology enabled device
to allow your phone to communicate with it.
Refer to the instructions for setting up Bluetooth
wireless technology (below) in conjunction with
the Bluetooth wireless technology device’s user
guide provided with your Bluetooth wireless
technology device.
3. Prepare the Bluetooth wireless technology
device (Bluetooth accessory) for pairing
as described in the other device’s user guide.
4. Select Menu → Bluetooth → My Devices.
5. Select Find New.
6. Your phone searchs and detects visible
Bluetooth wireless technology enabled
devices in the vicinity.
User Guide for the Kyocera Xcursion Phone
53
7. Press
to select Add.
Connecting and disconnecting
to a Bluetooth wireless
technology device
Before you can use the Bluetooth wireless
technology functions of your phone, you must set
your phone to be ready to communicate with
a device. This is called “connecting.”
8. Select the device with which you wish to pair
with your Xcursion phone from the menu and
press
to select Add.
Note: When pairing is initiated from another
Bluetooth wireless technology device, you see the
prompt “Device <device name> requests to
connect using Bluetooth. Accept/Reject?”.
Connecting to a Bluetooth wireless
technology device
9. Enter the password provided in the Bluetooth
wireless technology device’s user guide,
if necessary and press
to select OK.
To connect your phone to an audio Bluetooth
wireless technology device:
1. Select Menu → Bluetooth → My Devices.
2. Scroll to the device and press
to select Connect.
3. A message on the phone tells you that your
device is connected. A headset icon appears
on the top row when a headset or HFK
is connected.
4. You are now ready to use the device
with your phone.
10. The phone waits for the Bluetooth wireless
technology device to respond.
11. The Bluetooth wireless technology device is
added to My Devices.
54
Using Bluetooth® Wireless Technology
Deleting a device
Disconnecting from the Bluetooth
wireless technology device
You can delete a Bluetooth wireless technology
device from your Xcursion phone if you will not
be using it any longer:
1. Select Menu → Bluetooth → My Devices.
2. Scroll to the device and press
1. Select Menu → Bluetooth → My Devices.
to select Disconnect.
2. Scroll down to the device you would like
Bluetooth wireless technology
settings
to remove.
3. Press
4. Scroll down to select Delete and press
5. Press to delete or to cancel.
Renaming the device
to select Options.
You can change/review the information about
each device you have set up on your phone.
1. Select Menu → Bluetooth → My Devices.
2. Scroll to the device and press
You can change the name of the Bluetooth
wireless technology device in your Xcursion
phone as follows:
to select Options.
3. Use the following options to:
–
–
Rename the device
1. Select Menu → Bluetooth → Settings →
Delete the device from your phone if you
My Name.
are no longer going to use it
2. Ener the new name in the text field and press
–
Services view a description of the device
(such as Headset, HandsFree, Object
Push, and Serial Port)
to save.
Visible Duration
You can set the time that your Xcursion phone
remains “visible” to other Bluetooth wireless
technology devices.
1. Select Menu → Bluetooth → Settings →
Visible Duration.
2. Select one of the following:
–
1 minute - Bluetooth wireless technology
will remain On Visible for 1 minute before
returning to On Invisible.
User Guide for the Kyocera Xcursion Phone
55
–
–
3 minutes - Bluetooth wireless technology
will remain On Visible for 3 minutes
before returning to On Invisible.
Always - The On/Off setting remains on
or off until you change it yourself.
Services
You can view a list of the available Bluetooth
wireless technology service protocols supported
by your Kyocera Xcursion phone:
1. Select Menu → Bluetooth → Settings →
Services.
2. A list of supported service protocols is listed.
3. Press
to return to the BT settings menu.
56
Using Bluetooth® Wireless Technology
12 CONNECTING TO THE INTERNET
3. Press
to select Yes to enable security.
Using the Web Browser
When you are connected, a browser home
page appears. It has a list of bookmarks and
some Web menu options at the bottom of
the screen.
You can use your phone to browse the Internet
if you have obtained phone Internet services from
your service provider and if over-the-air Internet
access is available in your area.
–
–
A
appears in a secure session.
Note: You cannot receive incoming calls while
you are using the Web Browser.
An underline and an arrow indicate that
there is more text. Press
view more text. Press
previous screen.
down to
to return to the
Starting the Web Browser
1. Select Menu → Web Browser.
-or-
–
To choose a site, highlight it and press
to select Go.
Press and hold
browser.
left to launch the
4. When you have finished using the Internet,
press to exit the browser.
A message about airtime fees appears every
time you start the browser.
Using the Web menu options
To cancel the message, see “Changing the Web
prompt” on page 58.
The following options may appear on your screen:
•
•
•
Home returns you to the main Web Browser
window, or home page.
For more information about how airtime is
charged, contact your service provider.
Mark Site saves the current location as a
bookmark for easy access.
2. Press
to continue.
If this is the first time you have connected to
the Internet, a message informs you that
security
Bookmarks displays a list of your saved
Web sites.
is not yet enabled for your Web Browser.
User Guide for the Kyocera Xcursion Phone
57
•
Setup gives you options for changing how
information is displayed.
Checking Net alerts
Alerts received from a Web site are sent to your
Net Alerts inbox.
–
–
Show URL displays the entire URL.
About Openwave displays information
1. Select Menu → Messages → Browser Alerts.
about your Web Browser version.
This action launches the browser inbox.
–
–
–
Encryption should not be used unless you
are instructed to do so by your service
provider.
2. Press
to accept browser fees.
3. Select an alert and follow the prompts.
Changing the Web prompt
UP.Link selects a different browser server.
You can use this option if you have more
than one Web Browser account.
1. Select Menu → Settings → Convenience →
Web Prompt.
Restart restarts the Web Browser.
2. Highlight an option and press
to select it:
–
–
–
–
At Start confirms that airtime fees will be
applied when you use the browser.
Searching for a Web site
How you search for a Web site depends on your
service provider. For more information,
contact your service provider.
At End verifies you want to exit the
browser.
Both prompts you when you start the
browser and exit the browser.
Going to a bookmarked site
1. Select Menu → Web Browser. If you see
No Prompts does not use any prompts.
a message prompt, press
to continue.
2. From your Web home page, select
Bookmarks. A list of bookmarks appears.
3. Enter the number corresponding to the
bookmark you want and press
.
58
Connecting to the Internet
13 GETTING HELP
Mexico:
001-866-650-5103
Customer support
Your service provider’s customer support
New Zealand: 0-800-990-100
department may be accessible directly from your
phone when you dial a number such as *611
(check with your service provider). They can
answer questions about your phone, phone bill,
call coverage area, and specific features available
to you, such as call forwarding or voicemail.
Panama:
Peru:
001-800-201-1984
0-800-51-934
Puerto Rico:
Venezuela:
1-866-664-6443
0-800-100-2640
Before requesting support, please try to
reproduce and isolate the problem. When you
contact the Customer Care Center, be ready to
provide the following information:
For questions about the phone features, refer to
the materials provided with your phone, or visit
•
•
The name of your service provider.
For additional questions, you may contact the
Kyocera Wireless Corp. Customer Care Center in
any of the following ways:
The actual error message or problem you
are experiencing.
•
•
The steps you took to reproduce the problem.
The phone’s electronic serial number (ESN).
•
•
•
Web site: www.kyocera-wireless.com
Email: [email protected]
–
To locate the ESN select Menu →
Phone Info and scroll down to ESN: for
the 11-digit number.
Phone: 1-800-349-4478 (U.S. and Canada)
or 1-858-882-1401. Customer support
phone numbers are also available in the
following countries.
Argentina:
Australia:
Brazil:
0-800-666-0052
800-507-000
0-800-55-2362
800-43-1212
Chile:
Colombia:
India:
01-800-700-1546
Toll free:1-600-121214
Toll: 0124-284-5000
User Guide for the Kyocera Xcursion Phone
59
Qualified service
If the problem with your phone persists, return
the phone with all accessories and packaging to
the dealer for qualified service.
Phone accessories
To shop for Kyocera Xcursion phone accessories,
also call us at (800) 349-4188 (U.S.A. only) or
(858) 882-1410.
Become a product evaluator
To participate in the testing and evaluation of
Kyocera Wireless Corp. products, including
cellular or PCS phones, visit
beta.kyocera-wireless.com.
60
Getting Help
14 CONSUMER LIMITED WARRANTY
Kyocera Wireless Corp. (“KYOCERA”) offers you
a limited warranty that the enclosed product or
products (the “Product”) will be free from
defects in material and workmanship for a period
that expires one year from the date of sale of the
Product to you, provided that you are the original
end-user purchaser of the Product and provided
that your purchase was made from an authorized
supplier. Transfer or resale of a Product will
automatically terminate warranty coverage with
respect to that Product. This limited warranty is
not transferable to any third party, including but
not limited to any subsequent purchaser or owner
of the Product.
KYOCERA shall, at its sole and absolute discretion,
either repair or replace a Product (which unit
may use refurbished parts of similar quality and
functionality) if found by KYOCERA to be defective
in material or workmanship, or if KYOCERA
determines that it is unable to repair or replace
such Product, KYOCERA shall refund the purchase
price for such Product, provided that the subject
Product (i) is returned, with transportation
prepaid, to a KYOCERA authorized service center
within the one year warranty period, and (ii) is
accompanied by a proof of purchase in the form
of a bill of sale or receipted invoice which
This limited warranty does not cover and is void
with respect to the following: (i) any Product
which has been improperly installed, repaired,
maintained or modified; (ii) any Product which
has been subjected to misuse (including any
Product used in conjunction with hardware
electrically or mechanically incompatible or used
with accessories not approved by KYOCERA),
abuse, accident, physical damage, abnormal
operation, improper handling, neglect, exposure
to fire, water or excessive moisture or dampness
or extreme changes in climate or temperature;
(iii) any Product operated outside published
maximum ratings; (iv) cosmetic damage; (v) any
Product on which warranty stickers or Product
serial numbers have been removed, altered, or
rendered illegible; (vi) cost of installation,
removal or reinstallation; (vii) signal reception
problems (unless caused by defects in material
and workmanship); (viii) damage the result of
fire, flood, acts of God or other acts which are not
the fault of KYOCERA and which the Product is not
specified to tolerate, including damage caused
by mishandling, shipping and blown fuses; (ix)
consumables (such as fuses); or (x) any Product
which has been opened, repaired, modified
or altered by anyone other than KYOCERA or a
KYOCERA authorized service center.
evidences that the subject Product is within the
one year warranty period (“Proof of Purchase”).
After the one year warranty period, you must pay
all shipping, parts and labor charges.
USE ONLY KYOCERA APPROVED ACCESSORIES
WITH KYOCERA PHONES. USE OF ANY
UNAUTHORIZED ACCESSORIES MAY BE
User Guide for the Kyocera Xcursion Phone
61
DANGEROUS AND WILL INVALIDATE THE PHONE
WARRANTY IF SAID ACCESSORIES CAUSE
DAMAGE OR A DEFECT TO THE PHONE.
PARTICULAR PURPOSE OR AGAINST
INFRINGEMENT OR ANY IMPLIED WARRANTY
OR CONDITION ARISING OUT OF TRADE USAGE
OR OUT OF A COURSE OF DEALING OR COURSE
OF PERFORMANCE. NO DEALER, DISTRIBUTOR,
AGENT OR EMPLOYEE IS AUTHORIZED TO MAKE
ANY MODIFICATION OR ADDITION TO THIS
WARRANTY.
Some jurisdictions do not allow the exclusion
or limitation of incidental or consequential
damages, or allow limitations on how long an
implied warranty lasts, so the above limitations
or exclusions may not apply to you.
This limited warranty gives you specific legal
rights, and you may also have other rights which
vary from jurisdiction to jurisdiction.
For warranty service information, please call the
following telephone number from anywhere in the
continental United States and Canada: 1-800-349-
4478 or 858-882-1401; or contact KYOCERA at
the following address: 10300 Campus Point Drive,
San Diego, California, 92121-1582, USA,
KYOCERA SPECIFICALLY DISCLAIMS LIABILITY
FOR ANY AND ALL DIRECT, INDIRECT, SPECIAL,
GENERAL, PUNITIVE, EXEMPLARY, AGGRAVATED,
INCIDENTAL OR CONSEQUENTIAL DAMAGES,
EVEN IF ADVISED OF THE POSSIBILITY THEREOF,
WHETHER FORESEEABLE OR UNFORESEEABLE
OF ANY KIND WHATSOEVER, INCLUDING BUT
NOT LIMITED TO LOSS OF PROFITS,
UNANTICIPATED BENEFITS OR REVENUE,
ANTICIPATED PROFITS ARISING OUT OF USE
OF OR INABILITY TO USE ANY PRODUCT (FOR
EXAMPLE, WASTED AIRTIME CHARGES DUE TO
THE MALFUNCTION OF A PRODUCT) OR
CONTRIBUTION OR INDEMNITY IN RESPECT
OF ANY CLAIM RELATED TO A PRODUCT.
REPAIR OR REPLACEMENT OF A DEFECTIVE
PRODUCT OR REFUND OF THE PURCHASE PRICE
RELATING TO A DEFECTIVE PRODUCT, AS
PROVIDED UNDER THIS WARRANTY, ARE YOUR
SOLE AND EXCLUSIVE REMEDIES FOR BREACH
OF THE LIMITED WARRANTY, AND SUBJECT TO
THIS WARRANTY, THE PRODUCTS ARE
APPROVED AND ACCEPTED BY YOU “AS IS”.
KYOCERA MAKES NO OTHER WARRANTIES,
REPRESENTATIONS OR CONDITIONS OF ANY
KIND, ORAL OR VERBAL, EXPRESS OR IMPLIED,
STATUTORY OR OTHERWISE, WITH RESPECT TO
THE PRODUCTS, INCLUDING BUT NOT LIMITED
TO ANY IMPLIED WARRANTY OR CONDITION
OF MERCHANTABILITY OR FITNESS FOR A
Attention: Technical Support.
DO NOT RETURN YOUR PRODUCTS TO THE
ABOVE ADDRESS. Please call or write for the
location of the Kyocera Wireless Corp. authorized
service center nearest you and for procedures
for obtaining warranty service.
62
Consumer Limited Warranty
INDEX
Numerics
1-touch dialing, 11
C
emergency mode, 12
exit emergency mode, 12
position location, 7, 42
calculator, 47
call counters, 12
calls
answering, 8
missed, 9
redialing, 8
camera
A
erasing
alarm clock, 7, 47
alerts
contact entries, 40
text messages, 27
for messages, 36
for missed calls, 10
analog mode, 7
auto text, 25
F
fast find, 17
fax mode, 41
menu options, 19
sending a picture, 19
setting up, 20
auto-hyphenation, 38
finding contact information, 16
finding new bluetooth
accessories, 53
flip
answering calls, 9
frequent contacts, 16
B
taking a picture, 20
banner, 37
battery, 1
blocking outgoing calls, 40
Bluetooth
color themes, 39
com port speed, 41
connect a Bluetooth accessory,
54
connecting a Bluetooth ac-
cessory, 54
connecting and disconnect-
ing, 54
deleting an accessory from
your phone, 55
determine duration of visi-
bility, 55
disconnecting a Bluetooth
accessory, 55
find new device, 53
invisible, 53
pairing, 53
renaming an accessory, 55
services available, 56
setting up, 53
G
contacts directory, 15
contrast, 38
countdown timer, 48
custom menu
games
Brick Attack, 50
doodler, 51
race 21, 50
creating, 36
updating, 36
H
hands-free car kit
answering using voice, 32
purchasing, iv, 60
hands-free headset
purchasing, iv, 60
hard pause, 15
D
data/fax setup, 13, 41
deleting a Bluetooth accessory
from your phone, 55
digital mode, 7
disconnect a Bluetooth accessory,
55
I
display contrast, 38
doodler, 51
icons, 7
inbox, 27
turning on and off, 53
visible, 53
Brick Attack, 50
E
L
emergency
calls, 12
language, 37
lights
User Guide for the Kyocera Xcursion Phone
63
lights-only mode, 7, 34
limiting calls out, 40
list of compatable Bluetooth
accessories, 56
lock code, 39
locking
controlling, 14
ringer, 13
voice dialing, 30
voice memo
erasing, 46
naming, 46
recording, 46
voicemail, 11
setting up, 6
volume
S
saved phone numbers
editing, 16
scheduler, 46
phone, 39
screen contrast, 38
screen icons, 7, 21, 26, 34
screen savers, 38
secret contacts, 10
security, 39
setting up Bluetooth, 53
silent mode, 7, 34
speakerphone
turning off, 9
turning on, 9
stopwatch, 48
symbol mode, 22
M
earpiece, 9, 35
key beep, 35
ringer, 35
memory, saving, 27
menu view, 37
N
W
number mode, 21
wallpaper, 39
warranty, 61
web browser, 57
World Clock, 48
O
outbox, 25
P
Pairing phone with Bluetooth
device, 53
phone numbers
editing, 16
verifying your own, 6
phone, unlocking, 39
position location, 7, 42
T
technical support, 59
text entry, 21
quick reference, 23
text messages, 24
time format, 39
timer, 48
R
race 21, 50
recent call icons, 10
renaming a Bluetooth accessory,
55
timing calls, 12
Tip Calculator, 47
TTY/TDD, 41
resetting the phone, iv
U
ringers
unlocking the phone, 39
choosing types, 34
for roaming calls, 13
silencing, 6
V
vibrate, 7, 34
visible duration period for
Bluetooth wireless technology,
55
volume, 35
roaming, 7
alerts, 13
voice answer, 32
64
|