WTUB
Compact theatre under-balcony enclosure
features
Q
Q
Q
Seamless coverage over 120˚
High SPL from compact enclosure
High frequency line array with proprietary
diffusion phase plug
Q
Q
Switchable input configuration
Dedicated hardware for under-balcony
and ceiling mounting
Q
Multi-laminate birch ply construction
applications
Q
Q
Q
Under-balcony fill in theatre sound systems
Wide dispersion infill
Speech and music reinforcement in conference venues
The Wavefront Theatre WTUB enclosure has been specifically designed for under-balcony use in theatres and
infill in venues requiring extremely wide horizontal coverage. The WTUB loudspeaker provides sound
reinforcement for speech and music with exceptionally consistent tonal balance over the whole of its coverage
angle. It also shares the same tonal characteristics as the larger members of the WT range, the WT2 and 3.
The unusual driver complement and geometry is responsible for the uniform coverage of the enclosure. A triple
soft dome, high frequency line array coupled with a proprietary diffusion phase plug gives very wide horizontal
and tight vertical dispersion. Its narrow width allows minimal separation between the two 6.5" (165mm) cone
drivers. This factor and the drivers’ 60˚ splay are responsible for the seamless horizontal coverage of the
WTUB. The two 6.5" (165mm) drivers feature 1.5" (38mm) voice coils and an innovative heat exchange system
to reduce power compression. A combination of ferrofluid and a rear mounted heatsink cools the high frequency
line array’s neodymium magnet assembly, with extreme high frequency overload being dealt with by an auto-
resetting over-current device.
Featuring fully passive operation and requiring no controller, the WTUB is extremely straightforward to deploy.
The enclosure input configuration is externally switchable between pins 1 and 2 on the fitted Neutrik NL4MP
connectors. This allows daisy-chaining of cabinets via a 4 core cable, even when they are fed with different input
signals.
The rugged, multi-laminate birch ply enclosure features M8 inserts for the dedicated mounting bracket and an
additional M8 ‘safety chain’ point. The multi-angled cabinet rear allows close proximity ceiling mounting with a
downward tilt of up to 45˚. A pole mount socket gives the additional option of tripod stand mounting.
Century Point, Halifax Road, Cressex Business Park,
High Wycombe, Buckinghamshire HP12 3SL, England.
Telephone: +44 (0)1494 535312 Facsimile: +44 (0)1494 438669
E-mail: [email protected]
All information is Copyright © 2006 Martin Audio Ltd.
1 of 3
WTUB
Compact theatre under-balcony enclosure
technical specifications
architectural and engineering specifications
TYPE
Compact two-way passive,
under-balcony reflex enclosure
The loudspeaker system shall be of the two-way passive
type consisting of two 6.5" (165mm) direct radiating
reflex loaded low frequency transducers and one triple
element high frequency line array coupled with a
proprietary diffusion phase plug mounted in a multi-
angled plywood enclosure. The enclosure shall be fitted
with an integral pole mounting socket and supplied with
a flying yoke. Input connector configuration shall be
externally selected by a switch at the rear of the
enclosure. Low and high frequency sections shall be
integrated by an internal 1.2kHz passive crossover
network.
FREQUENCY RESPONSE (5) 80Hz-18kHz 3dB
DRIVERS
2 x 6.5" (165mm) bass mid drivers
3 x 1" (25mm) soft dome HF line array
200W AES, 800W peak
RATED POWER (2)
RECOMMENDED AMPLIFIER 200-400W into 4 ohms
SENSITIVITY (6)
MAXIMUM SPL (7)
NOMINAL IMPEDANCE
DISPERSION (-6dB)
CROSSOVER
ENCLOSURE
FINISH
PROTECTIVE GRILLE
CONNECTORS
93dB
115dB continuous, 121dB peak
8 ohms
120º horizontal, 40º vertical
1.2kHz passive
16 litre, multi-laminate birch ply
Textured black paint
Black perforated steel
2 x Neutrik NL4 switchable for
input +1,-1 or +2,-2
FITTINGS
2 x M8 threaded inserts for dedicated bracket
1 x M8 insert for safety point
1 x mounting pole socket
(W) 480mm x (H) 212mm x (D) 344mm
(W) 18.9ins x (H) 8.4ins x (D) 13.6ins
12kg (26.4lbs)
Performance of the loudspeaker system with its
electronic controller shall meet or exceed the following
criteria:
Frequency response measured 1 metre on axis shall be
80Hz-18kHz 3dB.
DIMENSIONS
WEIGHT
High frequency dispersion at -6dB points shall be
120˚H x 40˚V.
Power handling shall be 200W AES, 800W peak.
Rated impedance shall be 8 ohms.
Maximum SPL measured at 1 metre on axis shall be
115dB continuous, 121dB peak.
Dimensions (W) 480mm x (H) 212mm x (D) 344mm
(18.9ins x 8.4ins x 13.6ins).
Weight 12kg (26.4lbs).
The loudspeaker system shall be the Martin Audio
WTUB.
N o t e s
(1) Measured on-axis in half space at 2 metres, then referred to 1 metre.
(2) AES Standard ANSI S4.26-1984.
(3) Measured in half space at 2 metres with 1 watt input, using band limited pink noise, then referred to 1 metre.
(4) Measured in half space at 2 metres using band limited pink noise, then referred to 1 metre.
(5) Measured on-axis in open (4π) space at 2 metres, then referred to 1 metre.
(6) Measured in open (4π) space at 2 metres with 1 watt input, using band limited pink noise, then referred to 1 metre.
(7) Measured in open (4π) space at 2 metres using band limited pink noise, then referred to 1 metre.
Tr a d e D e s c r i p t i o n s A c t
Due to Martin Audio’s policy of continuing improvement, we reserve the right to alter these specifications without prior notice.
Martin Audio is committed to refining state of the art sound reinforcement, combining in-depth product and field applications
research with advanced manufacturing techniques. Every Martin Audio product is built to the highest manufacturing standards
and rigorously tested to ensure that it meets the performance criteria specified in the design.
Century Point, Halifax Road, Cressex Business Park,
High Wycombe, Buckinghamshire HP12 3SL, England.
Telephone: +44 (0)1494 535312 Facsimile: +44 (0)1494 438669
E-mail: [email protected]
All information is Copyright © 2006 Martin Audio Ltd.
3 of 3
|