SEATTLE
digital coffee
maker
y
29801_IM.indd
1
2013/10/28 08:16:15 AM
6. Ensure that the carafe is securely placed in it’s If the time it takes to brew a cup of coffee is suddenly
original position.
7. Plug in the coffee maker. The red indicator light will
come on.
increased, it is recommended that the coffee maker
be de-scaled. The harder the water is in your area, the
more often the coffee maker needs to be de-scaled.
8. After the brewing process the coffee maker has a 2 The hardness of the water can be advised at your lo-
hour keep warm function, after which the appliance cal waterworks.
will switch off automatically.
9. If the glass jar is empty or the keep warm function Environmental tip
is not required, turn the appliance off by pressing An electronic appliance should, when it is no longer
the”on/off” button again.
capable of functioning be disposed with least possi-
ble environmental damage. The appliance should be
disposed according to the local regulations of your
Auto-Brew:
•When plugging in the appliance, the LCD display municipality. In most cases you can discharge the ap-
indicates “12:00”.
pliance at your local recycling center.
•Press the “prog” key once. The LCD display will
show “clock” flashing in the top right corner.
Caution
•Press the “prog” key once more, The LCD display •The supply voltage from the wall socket must cor-
will show “timer” flashing in the top left corner.
•Press the “Hour” key to set the hour.
•Press the “Min” key to set minutes.
respond with the voltage stated on the rating label
at the bottom of the appliance.
•Use only cold water to fill the water tank!
•After setting the time, press the “prog” key within •Ensure the glass jug is placed properly in its posi-
8 seconds to validate the time setting. The green tion when brewing coffee.
indicator light will be on until it has reached the pro- •Between the brewing processes switch off the appli-
grammed brew time. Once the programmed brew
time is reached the green light will go out and the
red light will come on.
ance and let it cool down for about 5 minutes. Then
refill with cold water.
•After the brewing process, always switch off the ap-
pliance.
Cleaning for external parts of coffee maker
•Disconnect the appliance before cleaning.
1. Be sure to unplug the plug from wall socket before •Keep the appliance out of reach of children.
cleaning.
•To switch off the appliance use the on/off switch.
•The control lamp going out indicates when the ma-
chine is off.
2. Wait for the appliance cool down before cleaning.
3. The appliance should be cleaned with a soft cloth
with mild soap and wiped dry.
4. Never immerse the appliance in water or any other Other
fluid.
•The appliance must only be used for purposes as
laid out by this instruction manual.
De-scaling
•The supplier will not be held liable for damages
caused by improper use of the appliance.
•Only an authorized repair agent may carry out re-
pairs on this appliance. Any attempts to repair the
appliance without using an authorized repair agent
will negate the guarantee.
To ensure a long lifespan of the coffee maker, you will
need to de-scale it from time to time. Frequency will
depend on how hard the water is in your area, and
how often you use the coffee maker. If you use your
coffee maker once or twice a day, the following guide-
lines for de-scaling should be used:
•In order to locate the authorized repair agent in your
area, please consult the supplier.
•Soft water, every 6 months.
•Medium water, every 2-3 months.
•Hard water, every 6-8 weeks.
29801_IM.indd
3
2013/10/28 08:16:16 AM
29801_IM.indd
4
2013/10/28 08:16:16 AM
|